I'm trying to put together the shocks for my 10T which are original team type dark coated shocks. I'm using the black plastic caps on them because the original aluminum ones are pretty roached. I tried putting them together with the o-rings for the...
Last post
Hey PBR, I've had this problem before with various associated shock caps too. Is this happenning with all your plastic caps or just one or two? How about when you put the cap on another shock? Sometimes the caps are molded with a tad too much...
Almost a double post but this one has the pictures with it.
I recently restored my 10T with new RPM front and rear a-arms, rear bulk head, Rear carriers with oversized bearings, MIP CVD axles, RPM stealth tranny with 2.65 gearing, rebuilt the diff,...
Last post
Very well, they have about 4 bins full of old rims, tires, misc parts. I bought me a set of HPI star wheels when I was last there. ;) If I find those I'll snag them for ya'.
here are some pics of my rc10t terminator with ss 4300 brushless
Last post
we race on an indoor oval carpet track. i will post some pics of our next race but that won't be till the last saturday of the month. as for the gearbox no problems yet 8) the ss4300 is a mild brushless. comparable to a 19 turn brushed motor....
I'm still very new to RC cars/trucks and I am having a problem with my RC10t. I just tried putting in a new stock electric motor in my RC10t. (my first time attempting this) The problem is once I got it hooked up the truck will only go in reverse...
Last post
There should be a reversing switch on your transmitter, that will revers the signal for the throttle trigger.
what is a descent starting point for stock and 19t pinion and spur. it does have the stock trans
only asking is that the truck came with motor and battery and the bat gets about 175+ during a few min run
Last post
i currently race my rc-10t based oval truck with a stocker on a short 125 foot oval with a 19-90 pinion spur combination and my motors come off the track after 5 minn. at 95 to 100 degrees according to my temp gauge. i agree that the larger spur...
:D I bought a new 10T back in 1992 when I was in 10th grade. It saw a lot of abuse and useage over the years and it has followed me to 4 different states and was not in working order for a long time. I was still messing with that reostat speed...
Last post
after all that i now have a 10t, it looked like fun so had to get one 8)
I`ve been watching ebay for alloy control arms for a T4 and havnt come up with anything.I see lots for the B4 but nothing for mine.Can anyone tell me if none were made for the t4 or are they just hard to find.I have found lots of nice parts but the...
Last post
I knew nothing of these trucks untill I got this one and have heard alot of good things about them.I was lucky to get it in this condition.It came without a body but I got a couple decent ones on the bay.I will post a couple pics when they arrive....
Anybody remember the story why narrow tires on the Stadium type trucks didn't catch on? I have my own opinion on this, but I want to hear your's.
I just ran my 10-T with the narrow fronts on it, and it behaved so well. :D That was what the truck...
Last post
The RC10T came out with narrow front wheels as there weren't any racing rules at the time. Every other truck and truck conversion was using wide front wheels (and all the available tyres were for wide front wheels) so when they formulated rules for...
I'm relatively new to rc cars/trucks and I finally got my two RC10t bashers running after about a year. I was wondering if I need special pinions specific to the for the RC10t (stealth tranny) or will any do?
Thanks
Last post
ya, definately get more than one size pinion. the rc10t came stock with an 87 spur.
i just dug my 10t out of my parrents basement and figured i'd finally get it going.i never compleated building it after i originally bought it so it sat for the past 15 years or so almost compleated.
a few years back i decided i wanted to try to get...
I bought my Son a T3 almost three years ago to replace his Tamiya Falcon. He needed something that was durable and was easier to find parts for. I originally set it up with a Novak XRS esc and a mild Kyosho 23turn modified motor. Top speed was...
this was aweful fun to put together. i finally had a reason to use some darn 10t parts...
cc double decker chassis, steering, shock towers, battery hold-down, and trans brace. technacraft turnbuckles, all rpm plastic besides the rear toe blocks and...
Last post
I must have gone by this thread a hundred times,Hoop' that truck is BADASS,and you can take that to the bank!! :twisted:
thanks dude. its definitely one of the meanest looking rc10's i got.
Hi guys it's not exactly a vintage, not as beautifull as scollins project, but it's probably the fastest Sand scorcher in the world :lol: :lol:
Last post
Parma I think still makes that Scorcher body. I just got to NIB ones over the holidays, and they look better than the old Bolink ones. Someone on ebay sells them.
Hi , the first (and last?) rerelease from AE is not a 6010 or a Worldcar, but a T3 RTR ... :lol:
Distribued and manufactured by Thundertiger (Europe only), it has the same specs as the T3: stealth tranny, front and rear aluminium parts...but it has...
Last post
I don't mind the metric hardware, it's just the fact that the over-all quality of AE stuff is going down the tubes that bothers me. And it is going down the tubes.
Recently I bought a T3 for a runner. It's the ready to run kit and it doesn't have bearings so I plan to get some from Walawala. I just wanted to confirm that 12 3/16x3/8x1/8 and 2 3/8x5/8x5/32 will fully ball race the truck.
Last post
Avid bearings are very good for the price. I run them in my B4/T4 rear wheel hubs and have about 30 more, cuz if you race, you know that they are always the first to become overly gritty whether cleaned or not.
Here are some pics of my my latest paint jobs. These aren't vintage, but this is the readers rides section, I read, and these are my rides. I guess you could say the GT is an extremely modified vintage truck. :P
Does anyone have a writeup on the old A-Main Racing (AMR) trucks as run by Kinwald, Lett, etc, pre RC10GT? I'm thinking 1991... My LHS guru recalls a RCCA writeup on Kinwald's truck.
Got two VERY different AMR trucks, both pre-GT, the only thing...
Last post
if you knew what month it was, i could scan it up, i have almost all rcca from 90-96
Found my old RC10T while moving and need some help to turn this thing into a beach basher with a Novak ss5800
system I had lying around, how can I beef up my drive train? lookink for bearings troughout my truck, what can I do?
Last post
Thanks everyone I hope to take it to the beach here in Hawaii by next weekend equiped with paddles
MAHALO!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I recently got the vintage bug since those old cars and trucks were so cool back in the day. Am also trying to get some vintage racing going on here in Houston. Its been really tough trying to get a buggy. I think you guys have them all. :P So I...
Built this up like my father's truck...Don't see too many around I dont think...Not much to it really...Fiberglass stretched chassis, flipped front arms...front shocks all the way around...Getting ready to finally make it RTR with a Speedgems...
First time ever in a forum so be gentle. First of all I am very new to RC vehicles and have recently purchased an RC10t off of the bay. However, I am having problems with the RC. I'm suspect of the ESC but I am not sure as I am a noob to all things...
Last post
Thanks I was just wondering. I guess I'll just take the pain and suck it up.
Tonight I took my RC10 gold tub runner out for a spin. It was a blast. It's got a 14t Speed Gems motor and a Super Rooster and a bunch of good old school stuff on it. I just drove it around the neighborhood. I built it to be a runner. I wanted to...
Last post
Tonight I took my RC10 gold tub runner out for a spin. It was a blast. It's got a 14t Speed Gems motor and a Super Rooster and a bunch of good old school stuff on it. I just drove it around the neighborhood. I built it to be a runner. I wanted to...
ok im going to be getting a pretty beat roller rc10t off electro for 50 bucks shipped. this is going to happen in a couple weeks when he getshome. well whats a good chassis? im going to be doing a shelfer so i was wondering what my options were. im...
Last post
tekin may still have a truck kit or two in stock, i would call them. they may be able to dig one up for you.
here's my F-team T3 brushless truck.I just finished bolting the last of it together today.Just need to add receiver and paint.It has a Lehner 4200 XL motor,and a Schultze 12-97 controller. Good for 90 plus continuous,and 120 plus amps at the HIT.She...
Users browsing this forum: No registered users and 15 guests
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
