Differences between B2 and B3?

[RustyBall]

I don't know if there is a thread about this somewhere, but what are the differences between the b2 and b3? They look very similar to me and I know there was a b2 to b3 conversion kit back in the day.

[jwscab]

check the 25yr thread for lots of details of difference between b2 and b3.
A BUTTLOAD of info so be prepared
https://www.rc10talk.com/viewtopic.php?f=35&t=13059

shorter answer: front and rear arms, c hubs, spindles, rear hubs, slipper, front and rear shock towers,trans plate, top plate, rear arm mounts.

[MarkyDents]

CC0BE72C-3393-4E1D-84D2-A8AA89B1E0AE.jpeg (98.05 KiB) Viewed 3143 times

CC0BE72C-3393-4E1D-84D2-A8AA89B1E0AE.jpeg (98.05 KiB) Viewed 3143 times

22A928F4-431A-431F-87F4-E9C978E2F51E.jpeg (66.28 KiB) Viewed 3143 times

22A928F4-431A-431F-87F4-E9C978E2F51E.jpeg (66.28 KiB) Viewed 3143 times

I pulled these from another thread a ways back, scans from RCCA.

[RustyBall]

Thank you both

[RustyBall]

So basically a B3 is just an updated version of a B2? like a B2.1 kind of thing

[juicedcoupe]

So basically a B3 is just an updated version of a B2? like a B2.1 kind of thing

If you change everything except the shocks and part of the transmission, is it really?

[RustyBall]

So basically a B3 is just an updated version of a B2? like a B2.1 kind of thing

If you change everything except the shocks and part of the transmission, is it really?

Its not like its a major change, its all geometry changes.

[juicedcoupe]

So basically a B3 is just an updated version of a B2? like a B2.1 kind of thing

If you change everything except the shocks and part of the transmission, is it really?

Its not like its a major change, its all geometry changes.

I understand that there is a lot of compatibility, but they nearly changed everything.

The B2 and B3 probably have about as many common parts as the B2 and the Team Car/Worlds cars do. Nearly everything is an evolution of its predecessor.

[scr8p]

If the B3 didn't share so many parts with the T3, I could see a B2.1 argument.

The same could be said about the 10T and T2. They share a whole lot more than the B2 and B3 do.

[RustyBall]

If the B3 didn't share so many parts with the T3, I could see a B2.1 argument.

The same could be said about the 10T and T2. They share a whole lot more than the B2 and B3 do.

Yes, but if the T2 was just a 10T.1 than the T3 would have been the T2. Then it would make sense as a B2.1.

The B2 and B3 are like a B6 and B6.3 the parts are just updated for geometry changes. The arms, towers, chassis, slipper, bearing carriers etc. have all been changed for geometry.

[RustyBall]

I understand that there is a lot of compatibility, but they nearly changed everything.

The B2 and B3 probably have about as many common parts as the B2 and the Team Car/Worlds cars do. Nearly everything is an evolution of its predecessor.

They changed the geometry of the parts. Like a B6 to a B6.3... Its not an entirely different car... Associeted made a conversion kit to go from a B2 to B3. So it would be just as easy to go from a B3 to B2. Most of the parts are compatible just different geometry.

[scr8p]

If the B3 didn't share so many parts with the T3, I could see a B2.1 argument.

The same could be said about the 10T and T2. They share a whole lot more than the B2 and B3 do.

Yes, but if the T2 was just a 10T.1 than the T3 would have been the T2. Then it would make sense as a B2.1.

The B2 and B3 are like a B6 and B6.3 the parts are just updated for geometry changes. The arms, towers, chassis, slipper, bearing carriers etc. have all been changed for geometry.

Thankfully, they didn't do all of that ".1 .2" crap back then.

[jwscab]

Right. These new cars that keep incrementing by . 1 every 3-6 months is stupid

[juicedcoupe]

Thankfully, they didn't do all of that ".1 .2" crap back then.

If you count all the versions of the original RC10, wasn't the B2 like the 10th iteration?

The Worlds car could have been the RC10.9




At any rate. I'm of the opinion that if you have to change nearly everything to get to the new version, it is a different model.

And yes. I understand that many parts are cross-compatable between the two and that hybrids are possible. But in their complete iterations, there are just too many differences for me.

[Seanster43]

Seems to be lots of differences but a good read for me as I will happily take a B2 or B3 or a B3 converted as I know these are getting thin on the ground!