c.c. slotted chassis build
- scr8p
- Administrator
- Posts: 16550
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 29 times
- Been thanked: 981 times
c.c. slotted chassis build
i picked this chassis up awhile back from apex (i think). i started throwing some parts on it, just to see what i'd come up with. here's where it's at so far.
c.c. slotted chassis w/ extra slot added on left side
c.c. team car shock towers
team losi aluminum steering bellcrank
robinson racing adjustable rear toe setup
robinson racing 18 degree kingpin/steering setup
mip teflon shock bodies w/ glass beaded caps............front only
andy's rear bulkhead
mip trans
rw racing yokomo wheel adapters f&r
trinity yokomo/dominator wheels
trc wing mounts
the shocks will most likely get changed, since jimmy hoffa's body will be found before i ever find a pr. of 1.32 mip shock bodies for the rear. i also need to get a couple packs of rc10 body mounts and a sheet of graphite. i'm gonna make a battery hold down setup similar to a yz10. or, i'll get some custom works hold down brackets and use some pure tech saddle pack straps.
c.c. slotted chassis w/ extra slot added on left side
c.c. team car shock towers
team losi aluminum steering bellcrank
robinson racing adjustable rear toe setup
robinson racing 18 degree kingpin/steering setup
mip teflon shock bodies w/ glass beaded caps............front only
andy's rear bulkhead
mip trans
rw racing yokomo wheel adapters f&r
trinity yokomo/dominator wheels
trc wing mounts
the shocks will most likely get changed, since jimmy hoffa's body will be found before i ever find a pr. of 1.32 mip shock bodies for the rear. i also need to get a couple packs of rc10 body mounts and a sheet of graphite. i'm gonna make a battery hold down setup similar to a yz10. or, i'll get some custom works hold down brackets and use some pure tech saddle pack straps.
- Asso_man!
- Approved Member
- Posts: 3959
- Joined: Thu Aug 03, 2006 7:49 am
- Location: EU
- Has thanked: 40 times
- Been thanked: 70 times
very nice car Jason, I love it! I also have Robinson Racing rear adjustable mounts and was wondering if they are easy to adapt...
Cheers Scr8p
Cheers Scr8p
_____________________________________________
_____________________________________________
Come and visit the stable
_____________________________________________
Come and visit the stable
- scr8p
- Administrator
- Posts: 16550
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 29 times
- Been thanked: 981 times
Re: c.c. slotted chassis build
over the past couple months i've been robbing parts off of this chassis for other builds. so, it's just been sitting in the corner. i was looking at it tonight, and had the idea of making it a mid engine. here's where it's at so far. just mocking stuff up. all of the new holes are drilled and countersunk. i think i'm gonna cut the rear tower down and use 1.02's on the back. the 1.32's seem like a bit too tall to be hanging off the back of a buggy.
- Attachments
-
- IMG_2778.JPG (110.59 KiB) Viewed 1967 times
- IMG_2778.JPG (110.59 KiB) Viewed 1967 times
-
- IMG_2779.JPG (133.58 KiB) Viewed 1967 times
- IMG_2779.JPG (133.58 KiB) Viewed 1967 times
- RichieRich
- Approved Member
- Posts: 2352
- Joined: Wed Jun 14, 2006 11:42 pm
- Location: Los Angeles, CA
- Has thanked: 36 times
- Been thanked: 19 times
-
- Approved Member
- Posts: 49
- Joined: Fri Mar 02, 2007 2:49 pm
- Location: redneck riviera,florida
Re: c.c. slotted chassis build
Looks like a dualsport rear tower might work, if you got one
"Sometimes in life, you ain't gotta like it. You just gotta do it." Quote from my own SUPERDAD. RIP 5/10/14
- Mr. ED
- Approved Member
- Posts: 5479
- Joined: Thu Dec 21, 2006 1:30 am
- Location: Back @ home: Belgium
- Has thanked: 59 times
- Been thanked: 56 times
Re: c.c. slotted chassis build
That tower size is just fine, look at the works YZ10, pretty much the same if not bigger.
You can allways hide it under the rear of the spoiler
Are you gonna put an 8th slot so you can keep the saddle pack congiuration?
(I think the back 2 slots will be covered partially by the moter)
To reverse the rdrive: are you going reverse moter, moterplate or belt drive?
Just curious
You can allways hide it under the rear of the spoiler
Are you gonna put an 8th slot so you can keep the saddle pack congiuration?
(I think the back 2 slots will be covered partially by the moter)
To reverse the rdrive: are you going reverse moter, moterplate or belt drive?
Just curious
- scr8p
- Administrator
- Posts: 16550
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 29 times
- Been thanked: 981 times
Re: c.c. slotted chassis build
someone added the front slot on the left side of the chassis. it was only supposed to be six. i do have a pack of yokomo battery hold downs for a yz10, so the 4-3 setup won't look out of place, imo. although, they'd have to be mounted on an angle, since the motor will be in the way of the battery post. i'll most likey just use some pure-tech saddle pack straps.
i'm gonna flip the topshaft and motor plate to the other side of the case. that way, any standard motor will work just fine. here's a couple pics with a motor installed. plenty of room to the batteries.
i'm gonna flip the topshaft and motor plate to the other side of the case. that way, any standard motor will work just fine. here's a couple pics with a motor installed. plenty of room to the batteries.
- Attachments
-
- IMG_2781.JPG (158.43 KiB) Viewed 1805 times
- IMG_2781.JPG (158.43 KiB) Viewed 1805 times
-
- IMG_2782.JPG (158.67 KiB) Viewed 1802 times
- IMG_2782.JPG (158.67 KiB) Viewed 1802 times
- scr8p
- Administrator
- Posts: 16550
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 29 times
- Been thanked: 981 times
Re: c.c. slotted chassis build
i made a roller out of it. i wanted to get a body mounted on it so i could get an idea of what it would look like. with a body on it, the rear tower doesn't look too tall.
- Attachments
-
- IMG_2783.JPG (131.9 KiB) Viewed 1755 times
- IMG_2783.JPG (131.9 KiB) Viewed 1755 times
-
- IMG_2784.JPG (130.04 KiB) Viewed 1754 times
- IMG_2784.JPG (130.04 KiB) Viewed 1754 times
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 8 Replies
- 668 Views
-
Last post by juicedcoupe
-
- 24 Replies
- 4550 Views
-
Last post by no-high-torque
-
- 9 Replies
- 2087 Views
-
Last post by klavy69
-
- 7 Replies
- 1698 Views
-
Last post by tommykart
-
- 1 Replies
- 755 Views
-
Last post by RichieRich
-
- 23 Replies
- 2352 Views
-
Last post by rc10johnny
-
- 8 Replies
- 1014 Views
-
Last post by Sixtysixdeuce
-
- 20 Replies
- 3626 Views
-
Last post by flustorm99
Who is online
Users browsing this forum: sixdub and 8 guests