YZ10, full rebuild!
Re: YZ10, full rebuild!
Not too shabby buddy. I do have some TRF511 trays that i think will line up on one hole of the YZ10 battery posts, may do some tinkering come the time, but I'm sure i read B44 trays fit very well too?
lee
lee
- stickboy007
- Approved Member
- Posts: 704
- Joined: Sun Sep 16, 2012 6:13 pm
- Location: Mahopac, NY
- Been thanked: 21 times
Re: YZ10, full rebuild!
If B44 trays fit, then I'm not sure how. I just got a B44 tray for one of my CAT 2000s and I tried fitting it on the YZ10. I was not able to get it to fit. At least for the left hand side, the motor mount and the center post get in the way and so you cannot use the full size of the B44 tray. If you do the C-shape and U-shape approach I took with that tray, then you can probably get it in there...
Re: YZ10, full rebuild!
Just spent the last painful, burnt fingered hours making 18 bumpers, all drllied, countersunk, and bent.
Just need to round edges, and polish in, and they will be put in the BST in a new thread as advised by Todd.
Dont PM me now, there not ready, but more tomorrow, promised you guys id get to them, oh and no big multiple orders, i want all the lads here to get a look in, as after a few more to make up, thats it, my fingers cant take it lol!
More in the AM!
Bests..... Lee
Just need to round edges, and polish in, and they will be put in the BST in a new thread as advised by Todd.
Dont PM me now, there not ready, but more tomorrow, promised you guys id get to them, oh and no big multiple orders, i want all the lads here to get a look in, as after a few more to make up, thats it, my fingers cant take it lol!
More in the AM!
Bests..... Lee
Re: YZ10, full rebuild!
Herenaushad wrote:I think fakiee put a gear chart on the yoke forum sometime back as I needed gearing advice too.
![Very Happy :D](./images/smilies/icon_biggrin.gif)
http://www.rc10talk.com/viewtopic.php?f=29&t=28126
Re: YZ10, full rebuild!
Guys i scored two sealed Novak 40mhz AM Polaris receivers last week, wanted one for ages to fit into my this model (for nostalgic reasons) sooooo, i have a question, can anybody recommend a higher end 40mhz am radio, I've got a Vantage R, but obviously its FM, and ill i can sees round are Acoms, and the odd Megatech, fancied something more specced up!
bests......lee
bests......lee
- stickboy007
- Approved Member
- Posts: 704
- Joined: Sun Sep 16, 2012 6:13 pm
- Location: Mahopac, NY
- Been thanked: 21 times
Re: YZ10, full rebuild!
You might want to check into whether Airtronics made a 40 MHz AM module for the Exzes.
Re: YZ10, full rebuild!
I can find Sanwa modules buddy, but nothing noting its for the Exzes.....unless I'm just being dense
lee
![Laughing :lol:](./images/smilies/icon_lol.gif)
lee
Re: YZ10, full rebuild!
Thats what meant, i CAN find the MODULES, be it Airtronics or Sanwa, just not the correct compatibility info
Typical
lee
![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
lee
Re: YZ10, full rebuild!
Painted myself a new shell for racing, and started on fitting the lipo packs. Ive used lipo locators, and filed a tad of the front posts, so i can keep it neat and as original as can be, just need to raise the posts now on spacers and were set. I ve added some ballast, but i think ill need more as i go, 20g at the cell/centre line, and 10g in the front, just need to get more steering.
lee
![Image](http://img.photobucket.com/albums/v642/ralphee/get-attachmentaspx_zpse9378afa.jpeg)
![Image](http://img.photobucket.com/albums/v642/ralphee/get-attachmentaspx_zps2e61ff75.jpg)
![Image](http://img.photobucket.com/albums/v642/ralphee/get-attachmentaspx_zps0d050c9a.jpeg)
lee
![Image](http://img.photobucket.com/albums/v642/ralphee/get-attachmentaspx_zpse9378afa.jpeg)
![Image](http://img.photobucket.com/albums/v642/ralphee/get-attachmentaspx_zps2e61ff75.jpg)
![Image](http://img.photobucket.com/albums/v642/ralphee/get-attachmentaspx_zps0d050c9a.jpeg)
- stickboy007
- Approved Member
- Posts: 704
- Joined: Sun Sep 16, 2012 6:13 pm
- Location: Mahopac, NY
- Been thanked: 21 times
Re: YZ10, full rebuild!
That's pretty interesting. Could you show some pics of the lipo "tray" assembly without the batteries installed?
-
- Approved Member
- Posts: 1001
- Joined: Thu Aug 22, 2013 1:05 pm
- Location: USA
- Been thanked: 1 time
Re: YZ10, full rebuild!
Its not a tray guys, didnt fancy that route, these are carbon pieces you CA to the lipo, works great!
Lee
Lee
- stickboy007
- Approved Member
- Posts: 704
- Joined: Sun Sep 16, 2012 6:13 pm
- Location: Mahopac, NY
- Been thanked: 21 times
Re: YZ10, full rebuild!
Oh I see. Very smart
Just have to make sure they stay on there throughout a race...
![Wink ;)](./images/smilies/icon_wink.gif)
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 10 Replies
- 1122 Views
-
Last post by flustorm99
-
- 3 Replies
- 769 Views
-
Last post by mikea96
-
- 6 Replies
- 1278 Views
-
Last post by buttmonkey1969
-
- 18 Replies
- 3890 Views
-
Last post by Ronbo
-
- 1 Replies
- 182 Views
-
Last post by Toaster
-
- 6 Replies
- 7992 Views
-
Last post by GoMachV
-
- 3 Replies
- 1223 Views
-
Last post by limestang
-
- 9 Replies
- 2748 Views
-
Last post by JK Racing
Who is online
Users browsing this forum: No registered users and 14 guests