Looking for a good place to order anodized nuts like these

[KyoshoScorpionKid]

Hello
I've searched google but I thought I would ask since I know someone uses them, do you have a good place to order nuts like these?

images.jpg (7.95 KiB) Viewed 1295 times

images.jpg (7.95 KiB) Viewed 1295 times

Thanks
Franco

[Coelacanth]

Hello
I've searched google but I thought I would ask since I know someone uses them, do you have a good place to order nuts like these?

images.jpg

Thanks
Franco

I've purchased lots of items like this from RCMart. I searched the online store for "flanged" and got this, plenty of colors & sizes to choose from. You didn't mention what size of nuts you needed.

http://www.rcmart.com/advanced_search_result.php?keywords=flanged&sort=1a&manufacturers_id=0

[KyoshoScorpionKid]

Looking for M4

Thanks
Franco

[SRTracer121]

also http://www.fastener-express.com/

and tower and a-main have good selection if you know what to look for

http://www.amainhobbies.com/index.php/cPath/1576_699/n/Hardware-Fasteners-Screws-Bolts-Washers

[Coelacanth]

It's good to note that Tower way over-charges for colored nuts. $12.99 for 4 colored lock-nuts?? Really?!

[KyoshoScorpionKid]

Doh! No Thanks RCmart has some put I want to find the right ones that can't be the short ones I purchased from fastener-express.

Franco

[Coelacanth]

Doh! No Thanks RCmart has some put I want to find the right ones that can't be the short ones I purchased from fastener-express.

Short ones? As far as I can tell, I've seen 2 kinds of anodized nuts; a normal kind and a low-profile kind. Maybe the ones in your picture are the low-profile ones. They come in both flanged and normal style. I wouldn't use the flanged ones unless I needed the nuts to lock onto a plastic surface of some sort. I use the unflanged kind for pretty much everything; shock towers, wheels, suspension link mounting, etc.

[KyoshoScorpionKid]

That's the thing I don't want short profile ones, like the ones in my original post. They are going to be used for Axle nuts so having the short ones on there look terrible.
Franco

[proffesso]

anyone tried home annodizing? or sending a bunch of parts off to get anno'd?

[klavy69]

anyone tried home annodizing? or sending a bunch of parts off to get anno'd?

I think it was Jake(bigjeepzz) that did a home annodizing setup with some really good results. If I remember right he had some mixed results in different items but something like this doin all nuts would be good even coloring.

Right now someone is getting(might be done now) an order of red annodizing together in the b/s/t area. If I get it the more people the less it is...something about tree counts(?) but its been done on here too.

Todd

[Bimdapogs]

Tamiya has those colors except purple and pink. Contact Borgfeldt Canada. Glenn will help you out.

[esaresky75]

Keep in mind you can anodize aluminum only. Most nuts that are a regular finish (zinc-chromate) are steel.

[THEYTOOKMYTHUMB]

I once had my nuts anodized blue just to prove a point to my wife. The process wasn't so bad, but removing it with oven cleaner and steel wool was pretty rough!

[klavy69]

I once had my nuts anodized blue just to prove a point to my wife. The process wasn't so bad, but removing it with oven cleaner and steel wool was pretty rough!

Just leave them blue...you'll need to prove your point over and over and over

Todd

[THEYTOOKMYTHUMB]

I once had my nuts anodized blue just to prove a point to my wife. The process wasn't so bad, but removing it with oven cleaner and steel wool was pretty rough!

Just leave them blue...you'll need to prove your point over and over and over

Todd

Good point! I'll at least wait 'til the redness subsides before I go in for a second coat.

Sorry everybody. I will gracefully bow out of this thread before the derailment is irreversible.