Part numbers

[wyattroa]

I am in the process of getting my rc10T running. I need a couple of part numbers. I am looking for the dog bones. I saw in a previous link for the MIP cvd's but tower says they are discontinued. I am also looking for part for my stealth trans. The trans is complete. I have the first metal piece which slides onto the trans arm first. I do not have a spur gear or clutch. Pretty much need it all. Any help would be great.
Robert

[treehugger]

you will find what you need here it has all the part numbers you want

http://www.theshreves.com/rc_stuff/rc10history.htm

Paul

[1of1547]

Thanks for that link, I've been looking for the history and progression of the RC10. Most tell you this or that, but not everything.

[treehugger]

i use these to

http://www.retromodelisme.com/home.html?

http://lowclasscc.net/downloads/

[wyattroa]

Where would I find a decal sheet? I know I can purchase the body from ebay, but can't seem to find a decal sheet.
Robert

[treehugger]

well if you find some rc10 T decals let me know first they are pretty rare

Paul

[wyattroa]

well if you find some rc10 T decals let me know first they are pretty rare

Paul

good to know.. oh, well..

[sneako43]

The tie-rods and the dogbones are the same as the SC10 (7253 and 7462). When I started my 10T rebuild, I was afraid that parts were going to be an issue. Really, they're not. The only 'non-original' part I am using is the body...I'm using an RC10T2 body. I think it looks better anyway. Between RPM and AE parts, I have replaced everything I had to.

[romulus22]

Where would I find a decal sheet? I know I can purchase the body from ebay, but can't seem to find a decal sheet.
Robert

i bought these and knowing they weren't originals. i was still a little disappointed in the low quality of some of the decals. they are better than none so they will do for now

http://oneofftees.com/zencartPGFX/index.php?main_page=product_info&cPath=2_19&products_id=111

[sneako43]

The tie-rods and the dogbones are the same as the SC10 (7253 and 7462). When I started my 10T rebuild, I was afraid that parts were going to be an issue. Really, they're not. The only 'non-original' part I am using is the body...I'm using an RC10T2 body. I think it looks better anyway. Between RPM and AE parts, I have replaced everything I had to.

Correction, the dogbones are not the same.

Oh, and I guess the RPM parts I'm using aren't original, either!

[bully]

Yeh the SC10 dogbones and or driveshafts are cpl mm longer than 10T. Part no 1082 at tower for cvd's