RC10Talk - The Net's Largest Vintage R/C Community

your link showed it came with the screws. If memory serves me right, all the screws from TRX on that bulk are machine all ready.
So you should be fine.

well your link from Integy still shows the same number. If i go to Tower's site i see a different bulk that fits both. http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXRTV2&P=Z the difference between these two are one is a screwed together half and the other is a solid part. Still should w...

This what I wanted for my Stampede 2wd Electric: Integy http://www.integy.com/st_prod.html?p_prodid=6997&p_catid=145 or Golden Horizons http://h1070362.hobbyshopnow.com/products/description.asp?prod=GHH02115 Aluminum Front Bulkhead (Blue) for Traxxas Rustler/Stampede/Bandit. Replaces the stock ...

and now i wish i bought the pan with the lid from GoodWill.... i thought i was doing good with a $.99 pan....

So do i let it simmer or actually boil for a bit.

vintage AE wrote:I use Losi 2.0 Step Pins on my RC10 runner that has 1.9 See wheels
http://www.losi.com/Products/Features.aspx?ProdId=LOSA7378S

very cool, thanks for posting..

Actual diameter (mounted ProLine Chisel g8 1.9" crawler tires) is right in the neighborhood of 3.45" total diameter. Here's another pic with a clear body/wing on board with these tires that I took last night... those look like a decent general bashing tire, would work well for the sand pit!

didn't see that graphite chassis... did you get it?

ok, let me as this on the front, will the RPM buggy arms fit the truck front mount?

Daddeo wrote:Good looking 10T! I say go with RPM arms and save or sell your Andy's arms, you will be happier.

the buggy rpm arms? or those for the truck...

Charlie don't surf wrote:

jwscab wrote:you can try using a center punch and punching around the hole, maybe....5 times or so? then use locktite.

I like this idea!

I did this and it worked. All is good.
thanks

kaiser wrote:i got mine from a us seller in az, oldschoolclassis or somehting like that on ebay.

hobbypartz has them for less than 90.
thanks

ok, figured i better post pics before you all think i do not have an AE.. Not sure i have decided what i am going to do with this. I cleaned out the ball diff and tightened a few things up... Kind of torn. My first intention was to RPM the suspension and run it the way it is. After researching more ...

as i finish making my list of items to build my runner i ran into another question. when using the truck front and front bulk head, i assume you have to trim the bulk head to fit the Andys arms? the 10T i have at home has a wider area where the arm mounts. On the rear arms if i brake a mount, is the...

Use the SWB/LWB holes that are not srtipped- what is SWB/LWB... i had to google this, i assume you mean wheel base? It is set up as the long now, i can move it but preferred to keep it there it is. If there is no decent fix then i will. Do i cut the tubes too then, i see there was not an extra hole...

The main screw for the steering bell crank has a stripped hole in the 10T nose. Any suggestions to fix it? I thought about peening it over a touch on the threads and then using my special locktite.