RC10Talk - The Net's Largest Vintage R/C Community

I've not seen a reproduction of the proformance shell being offered. I believe I read that the original mold was modified into the shocks behind the tower pro version when that was being produced, so a reissue is not possible either, but can't confirm.

I have one, Had it for years, don't recall exactly where I got it but it was in with a bunch of other gears and parts. I always assumed it was a one-off molding error. The pic here is the triangle center, standard gear and ball bearing gear. IMG_4292.JPG The triangle hole is too small to fit the dif...

The rev-a and rev-b are the revisions, "production release" is the first version. I just flipped through my copy of production release and rev-a and didn't see any obvious major changes, they look the same to me. I don't have a rev-b to compare. The battery holder may have changed to the s...

A thorp diff gear vs brass top gear, nice and pointy at the tooth tips. There was a ton of brass dust in the gearbox when I received it, probably could have run a couple more packs before it fully let go. Still fared better than some of the plastic gears have

I've gotta find that 5108 to fill in my collection. Does anyone know what 5109 or 5111 are? (assuming they weren't skipped) The 5110 complete set has a ball bearing center gear and the deeper recess side gear as well, didn't know it was available separately though. 5100 Diff gear set 5101 left gear ...

the 2-56 fit but strip easily as the internal diameter is a touch big. I ran the car and they stayed in place for most of the run till it flipped. They look nice on the shelf though.

A little late to the party but here is mine, using 2-56 and 6-32 nylon nuts and a hackfab mini-t oval battery strap cut up and attached to a printed mount.

do you have access to a 3-d printer? I have a few different designs uploaded for no-drill servo mounts with and without integrated battery holder.

https://www.thingiverse.com/thing:3152814

IMG_3144.JPG Got a T2 last year as a local partial trade and flipped the truck on ebay but still have the box. This one is a little out of place in my collection. PM me if interested, not sure where you are located, would have to figure out shipping. The JRX-T box behind it has a nearly complete tr...

do you have a t2 box for it all?

Will be interested to see what other goodies may be inside the gearbox, MIP,? thorp? BB diff gear?

That should work. I haven't done it on the ghaphite chassis but MIP made a steering kit that used 4-40 screws through 8-32 countersunk holes for the RC-10GT that I used for years, though that was an aluminum chassis. Just make sure that the base of the cone where the threads start doesn't end up abo...

That's impressive, great job.

looks great, what 3d printer did you print the arms and bulkhead with?

Lavigna wrote: ↑Thu Jul 09, 2020 8:25 pm ^ Limestang - You are supposed to drill 2 holes but I didn't. It would be a shame to drill a mint CC chassis.

It's a floating servo mount that was way ahead of its time!

Looks great