What aftermarket parts are on my 10L?

[AndrewSi]

My uncle gave me this 10L awhile back and just curious to see what or if any aftermarket parts are on it. The turnbuckles, front brace, shock, rear hubs, the plastic diffuser under the motor, wing mounts, and a aluminum motor mount look different than most I see. The shock is black and plastic? where most I see are gold.

I only have two pics so hopefully someone with a trained eye can tell me what it has.

[bearrickster]

the front upper brace is a HPI part I have a few of them

[AndrewSi]

the front upper brace is a HPI part I have a few of them

Thanks!

[xanadu]

HPI rear lower plate. Trinity spur gear.

[EvolutionRevolution]

If the shock is exactly like a Associated shock, but in black (aluminium by the way), it's a HPI RS-10 shock.

The motor mount is possibly an optional Associated part, but we'd need a better picture to confirm.

[scr8p]

the rear hubs are hpi as well, probably the upper pod brace too.

[EvolutionRevolution]

the rear hubs are hpi as well, probably the upper pod brace too.

The upper pod brace looks like the stock Associated part to me, the HPI part has an additional piece of carbon on the right side.

[Phin]

If the shock is exactly like a Associated shock, but in black (aluminium by the way), it's a HPI RS-10 shock.
....

Looks like a MIP Teflon coated shock to me. I have a set of .71s and eBay just hosed me out of a pair .56 bodies last night.

[AndrewSi]

If the shock is exactly like a Associated shock, but in black (aluminium by the way), it's a HPI RS-10 shock.

The motor mount is possibly an optional Associated part, but we'd need a better picture to confirm.

The shock does not look like an associated shock, there is no hex on the the shock body. It is completely round.

I will see if I can get my camera back today so I can get some better pics.

[Phin]

If they look like the shocks on the back of my RC10...except shorter...they're MIP shocks.

http://www.rc10talk.com/viewtopic.php?f=35&t=25655


These were the .56 from eBay:

[AndrewSi]

If they look like the shocks on the back of my RC10...except shorter...they're MIP shocks.

http://www.rc10talk.com/viewtopic.php?f=35&t=25655


These were the .56 from eBay:

Yup, they look similar if not the same.

[Phin]

The MIP shocks should also be bottom loaders like the original gold shocks if you need more confirmation.

[AndrewSi]

The MIP shocks should also be bottom loaders like the original gold shocks if you need more confirmation.

confirmed! Mip shock it is!

[WC1982]

Tecnacraft turnbuckles and an unknown brand of wing mounts? Bolink, Trinity?

[littleVETTE]

very nice 10l. just curious to what body your uncle had on it?