My uncle gave me this 10L awhile back and just curious to see what or if any aftermarket parts are on it. The turnbuckles, front brace, shock, rear hubs, the plastic diffuser under the motor, wing mounts, and a aluminum motor mount look different than most I see. The shock is black and plastic? where most I see are gold.
I only have two pics so hopefully someone with a trained eye can tell me what it has.
Hey everyone, are there any parts available for the old rc10L? Can some of the more current parts for the 10L3 or 4 fit or can they be modified? or is this car a shelf piece?
I came across this local chain driven gearbox , that i thought was for the rc10 when i purchased it, but when i took it home to fit to a chassis , the bolts holes didn't line up. I quickly realized its for a ultima based buggy, lucky i came across...
Last post
nice car, but if you plan to run it, you'd better fit something in that motor :lol:
i recently bought this front bracket piece off of ebay from some guy in korea who is making the parts at his work i guess.just want to say the part works real well.i did haggle him down to 30 shipped though...
Heres the second car I worked on this weekend. Its assembled using a bunch of aftermarket spare parts I had laying around. The only AE parts are the 6gear tranny, bulkhead, shock collars, dog bones, body post and front suspension mounts. The rest of...
Last post
Carbon turnbuckles on the front?
What the dilly yo?
look like carbonfiber tubing slid over the allthread.
Lookin good fastang. Its amazing how you can gather enuf parts to build several cars :?
Todd
I am curious about other folks' experience with aftermarket part quality for modern Kyosho models, more specifically the re-re Optima Mid. For example I am looking at CVD's for my re-re Mid. I see EXO Design and Koswork both make these. I have no...
Last post
Thanks for the reply on the EXO axles and other parts. CVA axles are the type of part where I would think soft metal or sloppy machining could quickly ruin your day. I plan to run brushless in the Mid and think these axles would be a good...
New to forum and looking for what and what manufacturers aftermarket aluminum parts will readily fit the RC10T with minimal modifications? A-arms, shock towers, castors etc?
Any help is greatly appreciated.
Last post
Besides the rear shock tower, all the GT parts should fit on a 10T
GT rear arm mounts don't work either
Then what manufacturer or other models parts will fit?
Just picked a new 10L up on ebay. Will need some work once it gets to me. Had a couple of questions. The wheels and donuts from windtunnel, are all the 4 bolt pattern compatible? Also, are there any rubber tires available for the 10l? Final...
Last post
Bring a blower to the track aka road because sand and foam tires do not make for a fun day. He will laugh until you blow by. Black dot rear foams are the ticket. Dual stage front foams are good for a little more life on asphalt.
Well I am not familiar with these cars at all and I don't understnad what makes the cars different from one another. I just recently bought a 10L and the box says it is a 10L Super Speedway.
I have been looking at the Proline bodies and I really...
Last post
everything is 10lss. the car and both extra chassis'.