2.2 wheels on a gold tub

[MelvinsArmy]

I know this has been covered dozens of times before, but when I type it into the search I just get a bunch of stuff I'm not looking for.

What is required to put 2.2's on the back of a gold tub? I have B2 wheels already. Do I just need to find some B2 or B3 rear stub axles and different sized bearings?

[skunk.werkz]

I think you should be able to use a 3/16 axle? and the correct bearings and you should be golden!

[THUNDERSTRIKE1]

10T rears fit directly and just need the bearing that fits in the front one for 10t bolt right on.DON

[scr8p]

What is required to put 2.2's on the back of a gold tub? I have B2 wheels already. Do I just need to find some B2 or B3 rear stub axles and different sized bearings?

well, if your using the stock rc10 hub carriers, you'll need to get 4 3/16"x3/8" flanged bearings. if your using 10t hubs, get the same size bearings, but plain.

i believe any of the associated 3/16" stub axles should work, although i've never tried them personally. i would just get a set of b2 mip cvd's. much more efficient.

[rc-stu]

This is from teamassociated.com's Early RC10 Tech Help Page:

How can I use the 2.2" buggy tires and rims?


In order to use the current wheels and tires you will need the following:
7378 3/16 axles
#9277 bearings (3/16 x 3/8 flanged bearings)
#7369 axle pins #7368 axle shims

[MelvinsArmy]

Cool, thanks guys!