were there v2 10mm shocks?

[JosephS]

The question says it all.
Were there Team Associated v2(10 mm) shocks that came before the v2 (12 mm) big bore?

I am comparing https://www.associatedelectrics.com/teamassociated/parts/details/91315-ASC91315-12mm_shock_kit_sc10_t4_front_-_all_mod_versions_/
vs
https://www.associatedelectrics.com/teamassociated/parts/details/7476/

[juicedcoupe]

Yes. There were small bore V2 shocks, with and without threaded bodies.

[JosephS]

Yes. There were small bore V2 shocks, with and without threaded bodies.

Thanks for that. I think my current build is actually using the small bore v2. I’m going to wager that the v1 is close enough in performance.

[jwscab]

Yes v1 and v2 are essentially the same. The seal end is changed slightly from the first bottom load to top load to bottom load with a cap. The seal is the same just held in place differently. The threaded bodies helped ride height setting tuning.

[JosephS]

Yes v1 and v2 are essentially the same. The seal end is changed slightly from the first bottom load to top load to bottom load with a cap. The seal is the same just held in place differently. The threaded bodies helped ride height setting tuning.

That is going to greatly simplify my build. I'll use what I have and get the right springs.

The Associated Enduro shocks look an awful lot like v2 10mm threaded shocks. I wonder if the rebuild kit will work.