#6002 - RC10 Worlds Car Kit

[mtbkym01]

This has probably been asked on the forum before but I struggled to find anything, but are these thunder tiger wheels the same as on the Worlds Car, but obvoiusly in white?

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXALSD

Cheers

[slotcarrod]

I do believe they have a close offset, but not 100% sure they are the same! They will fit for sure, but may be a tiny bit narrow.

[mtbkym01]

I do believe they have a close offset, but not 100% sure they are the same! They will fit for sure, but may be a tiny bit narrow.

Ok, it's all good, I managed to source some AE's ones in white anyway, so it doesn't matter now anyway, cheers

[mtbkym01]

Here you can see why I ordered the white wheels, as the yellows just don't work

[JK Racing]

The Thunder Tiger wheels are the ones I have used for the past couple years. They work perfect and are the right offset.

[mtbkym01]

The Thunder Tiger wheels are the ones I have used for the past couple years. They work perfect and are the right offset.

Good info to know, cheers

[mtbkym01]

Have also ordered some 5 spoke JC Racing wheels, may consider dying a set black to see how that will look on my "pink & white" worlds

[mikea96]

I like it and the paint job looks good!

[GodSpeed]

Have also ordered some 5 spoke JC Racing wheels, may consider dying a set black to see how that will look on my "pink & white" worlds

You can order the JC Racing 5-spokes in black, white and yellow....can't you?

[mtbkym01]

Have also ordered some 5 spoke JC Racing wheels, may consider dying a set black to see how that will look on my "pink & white" worlds

You can order the JC Racing 5-spokes in black, white and yellow....can't you?

I only thought of it after I ordered the wheels

[R/Cat]

Code: Select all

I'm running out of space... honestly!! But i have to buy one... have to..

lol..same here and I promised myself that the re-re classic would be my first and last AE car. My wallet won't allow me to get one yet but hopefully the fact that the WC is not a limited release will at least give me an opportunity to purchase one in the future....maybe.

[stulec52]

Hey
So I had the problem with the top shaft in my build.
It felt horrible to turn the gearbox over by hand.
Anyway I got a new b4 top shaft to replace it.

But it doesn't fit.
Oh it's the MIP part if that makes any difference.

What am I doing wrong here?

Thanks

[JK Racing]

the MIP top shaft for the B4 has the spacer built into the shaft. the AE part the spacer is separate. for the stealth, the spacer is not needed...so the MIP shaft does not work

[stulec52]

Ah.
Ok, well that explains it

Thanks JK
Fortunately I have a B4.2, so I guess I can just swap the MIP one into that car.

[wydraz]

I also had the top shaft issue - inner slipper hub rubbed on the motor plate and the transmission was rough.

AE sending me a replacement.