Can you help me identify these Kyosho cars?

[cautiousone]

Ok, I picked these two cars up and I have no clue what they are. They are both Kyosho, but I'm not sure what models they are. Any help you guys could throw my way would be great. Thanks in advance, Damon...

[GoMachV]

The off road isn't a kyosho, it's a SG Coyote 2wd
They came in 2wd, fwd, and 4wd
There are some good threads here on them. I have a fwd version new in box


The Indy car is a kyosho and went by a few names such as the target scotch Indy and even a nastruck. SR5 was the designation

[cautiousone]

Wow, you're good and thanks for the help on that, cause I was coming up blank on these.

[Mr. ED]

I guess the sticker was from the bottom of the receiver. I knew what the car was from the first pic but still got fooled when I got to that pic

[GoMachV]

Yup it has a good old kyosho pulsar radio

[cautiousone]

well the SG Coyote sure looks interesting. I was sitting here checking it out and thinking of hooking a battery pack to it and I noticed that there was not a spot to store a battery on this unit. So I dug up some pictures and that's a pretty crazy setup and it explains the plastic clips on each side of the frame as well. I'm going to have to run it, hahaha...

[GoMachV]

Run it but stay with the stock motor the gears were not known for their longevity unless they were the improved metal units.

[Mr. ED]

could you tell me what type of fitment is used for the other cars rear wheels please? Is it 12mm hex?

[GoMachV]

The SR5 used a hex Basically like tamiya did on their old pan cars. I don't recall if it was 12mm tho

Here is the hex it keys into

[Mr. ED]

ok... I'm confused
I'll see if I can find some exploded view or a manual

[GoMachV]

Ed, you are talking about the kyosho f1 right? They have always been a hex even back in the fantom days. I'm just not sure of the size

[Incredible_Serious]

ok... I'm confused
I'll see if I can find some exploded view or a manual

If you do find a manual for the Kyosho, let me know where from, please..... I have a stack of parts for these, but no manual to put them all together!

Alex

[Mr. ED]

Ed, you are talking about the kyosho f1 right? They have always been a hex even back in the fantom days. I'm just not sure of the size

I know that: I have a plazma = 2WD Phantom basically.
And that's why I'm interested: looking for parts that might work on the plazma as I'm rolling it hard lately and the original wheels and spur/diff are near impossible to get still

[GoMachV]

Ahhh I get it now ill keep my eyes open for the manuals too

[cautiousone]

Ed, I pulled the wheel off the SR5 and it looks like it uses a 14mm hex for this one.