this stinks... nothing is being done about making these... ok i do know there was 1 person making this part but $30 for rear arm mounts is too much for me to spend..
i believe so too, but those are Alloy and mainly for shelf queen, i was kinda hoping that it'll be for racing. Hoping with different options so that we could adjust as to different track condition. ..
Hey Chad, already got the Arms (F/R) they are great, but it would be awsome if you could mass produce other parts aswell that are in demand, believe many of us will be lining up justto have a pair of it...
waiting for response and actions.
“It is more shameful to distrust our friends than to be deceived by them.”
― Confucius
if you send chad a part, and it's something he can make, he'll make it for you. just don't expect to pay $5.00 for it.
i'd be willing to bet that to make an near exact replica of the associated rear arm mount (with the anti-squat) would be quite time consuming, and in turn, make it quite expensive. and alot of times, people want stuff, but when i comes time to actually pay for the part, they all of a sudden don't need it anymore when the price is more than they want to spend. i don't blame chad for not making a bunch of them. i wouldn't want to spend a bunch of time making something to get stuck with them, either.
scr8p wrote:if you send chad a part, and it's something he can make, he'll make it for you. just don't expect to pay $5.00 for it.
i'd be willing to bet that to make an near exact replica of the associated rear arm mount (with the anti-squat) would be quite time consuming, and in turn, make it quite expensive. and alot of times, people want stuff, but when i comes time to actually pay for the part, they all of a sudden don't need it anymore when the price is more than they want to spend. i don't blame chad for not making a bunch of them. i wouldn't want to spend a bunch of time making something to get stuck with them, either.
i know what your talkin about... i was thinkin 0 degree, no anti-squat, bare metal or plastic.. i just like rc stuff cheap... rc is my cheap hobby
yes, i know what you mean. but for the passion of this hobby, will surely buy given the quality of Chads works... its proven...for me its worth buying replica pieces from Chad coz you know of the quality will certainly surpass the original. like for example the Klein Arms. I may have not run or raced it yet but based from the design and finish product. i may say that its bullet proof. Paying a hefty price for a product that will certainly exceed its use when it comes to durability is definately an investment. As this hobby is certainly does not comes with a small price tag.
cheers!!
“It is more shameful to distrust our friends than to be deceived by them.”
― Confucius
slow_jun wrote:yes, i know what you mean. but for the passion of this hobby, will surely buy given the quality of Chads works... its proven...for me its worth buying replica pieces from Chad coz you know of the quality will certainly surpass the original. like for example the Klein Arms. I may have not run or raced it yet but based from the design and finish product. i may say that its bullet proof. Paying a hefty price for a product that will certainly exceed its use when it comes to durability is definately an investment. As this hobby is certainly does not comes with a small price tag.
cheers!!
ive seen the stuff and it looks great..its just i need replacement parts not race parts... if your not racing this hobby can have a small price tag,im proof
Hey everyone, I found this thread in the search and was wondering what everyone is doing for rear arm mounts since it sounds like there aren't any aftermarket options?
I think I may have found a replacement part for these. Team Cobra Nemesis rear arm mounts, I don't know if anyone else has found these. I have a set on the way and will report findings upon arrival.
daniels9424cs wrote:I think I may have found a replacement part for these. Team Cobra Nemesis rear arm mounts, I don't know if anyone else has found these. I have a set on the way and will report findings upon arrival.
Those appear completely different from the rc10t pieces at least. Russel RC is the only place I've seen that has them and only in 1.5 degree of toe, and I don't know if they fit yet.
what do you think the chances are of these fitting the 10T? If they do fit they should expect an increase in demand of these. Team cobra is ran by C and M Mfg. which does injection molding, so I would bet this is made by them for them so they can keep producing cars.
just wondering what is the toe-in angle on the rc10 rear arm mounts? ive read references to 3deg,1.5deg and 0deg in other threads and am wondering what is the kit standard.or is it the outer hub that changes? :?
I'm about 99% sure the answer is yes but the seller couldn't say for sure... I bought some rc10gt blocks a few months back that I was told would fit but apparently they are slightly off to mount on an rc10t.
Last post
Hi,
Team Associated made running changes, they also recycled some part numbers just to make things confusing,
and there was optional rear mounts and hubs.
ASC6360, 1.5 degrees rear mounts are in the #7001 kit.
I busted one of my stub axles the other day presumably bc i have too much down travel in my shocks ( im gonna fit that soon) and my stub axles are old and warn...
I ordered a cvd kit and some RPM arms for the rear. I noticed before but just wanted...
Last post
thanks gomachv.
Also, when i mount the shocks on the outer most hole on the rear arms, the tire touches the shock. the rear is set with some negative camber. would i just need to go more neutral to positive camber ideally or just not use the outer...
I have been a member for awhile and put up a couple of posts here and there, but this will be my first question on the forum. Through the years I have purchased a few RC10s and parts lots, and amassed a few rear arm mounts, front and...
Last post
Many thanks for the reply, and great info, looks like I need to get a protractor and a piece of tubing or rod to seperate all the front carriers I have. Now will there always be a L or R markings on the 1.5 Rear hubs or do I want to go by how thick...
Please anyone out there, i need to know where I can find a t4 rear arm mount but it has to be aluminum blue or silver but i cant find anything on online only plastice or black alloy i need blue alloy. Anyone know where I can locate one of these?...
Last post
Just found blue so disregard this post thanks to everyones help
my dilema is i want stronger rear arm mounts and im really limited on what i have laying around and just dont know if what i have will survive the season im gonna put my truck through. any suggestions as to what to run or where to buy from?. i have...
Last post
soo funny, this topic never ends.. its like if someone made rear arm mounts for about $10 shipped they could sell a ton .. they are a $2 part
Are they still available new?
I'd like some new black 3 degree toe-in ones if they are. Anyone know the part number?
Cheers,
G
Last post
The mounts physically fit the chassis, but...
The arms are shoved into the short wheelbase position and, at least with regular white arms, they're bound against the chassis tub. Also there's an axle clearance issue, as the GT trans is slightly...