Inner rear arm mounts

[Northy2]

Are they still available new?
I'd like some new black 3 degree toe-in ones if they are. Anyone know the part number?

Cheers,

G

[templeofspeed]

7363 was the part number. I sent my last new pair to mrlexan, perhaps he's still got the used pair he was replacing them with?

[Northy2]

Are they not available any more then? Any truck ones that will fit?

Cheers,

G

[scr8p]

northy, i got a pair for ya.

[hkp]

G, they are discontinued mate I think..

[mikedealer]

call me crazy but havent they always been available here? i never heard they were discontinued

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LX3387&P=7

[mikedealer]

northy i have some hammad ghuman alloy carriers if you are interested in a light aluminum option, i use them on my runner and never had a problem with them breaking as i used to

[Northy2]

call me crazy but havent they always been available here? i never heard they were discontinued

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LX3387&P=7

Those are the truck ones that I thought might work. They have no wheelbase adjustment, but to be honest the wheelbase adjustment on the original ones is a little savage!

G

[Northy2]

northy i have some hammad ghuman alloy carriers if you are interested in a light aluminum option, i use them on my runner and never had a problem with them breaking as i used to

Mike, got any pics?

G

[mikedealer]

new and slightly used, got a couple extra somewhere too nip, probably in storage. both 0 and 3 degree

[Northy2]

Oh, they look cool (but not blue), where do they come from?

G

[templeofspeed]

call me crazy but havent they always been available here? i never heard they were discontinued

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LX3387&P=7

Those are for the GT... no worky.

[wyldbill]

i have a set of thoes too. but mine for some strange reason look to be both for the same side. they both look identical and are not even marked right or left. is it just me or did i get a factory f**k up or something? i bought them from a local racer for 5 bucks and they were n.i.p. so i didnt complain.

[mikedealer]

call me crazy but im pretty sure the holes are identical to the other ones, i just matched them up and they look nearly identical unless im missing something. keep in mind there are usually 4 holes to mount on the production ones, the picture is old i guess

i also have these too, in 3 degree, 3.5 degree, and 4 degree in robinson, and 1.5 degree in the original AE ones

[mikedealer]

yea i just did a test fit, the GT ones match perfectly 100%? am i wrong?