Bad ebay seller for tamiya chassis upgrades
Bad ebay seller for tamiya chassis upgrades
Hey everyone,
I have never done this before, but this ebay seller was so rude about my situation I feel the need to warn you guys. If you are looking to purchase Tamiya chassis upgrades for your drifter, mini, or any other Tamiya on-road chassis, do not order parts from rcdamper. I ordered a set of universal shafts and aluminum turnbuckles for my TL01 chassis, and neither product fit/worked properly without major modification and extra costs. The turnbuckles were all a lot too long, and the universal shafts are about 3mm too long. When I went to use the universals, they substantially limit the compression travel of the suspension. They won't even fit at all unless you remove the inside o-ring from the drive cup. I needed to spend another 12 bucks on new 3mm wide inside hub bearings to get these shafts to work almost properly. Anyways, I requested a 50% refund for my issues and efforts, provided rcdamper with 6 pics demostrating my issues and provided him detailed explanations of what I had to do to get these products to work properly in the chassis he advertised. He only reponded back once, asking for pics, and then never again. I created a dispute though paypal, and he still refused to offer up the 50% refund. Mind you this amounted to $19. He still refused which required me to take all of the items off of my car and send them back to him, at my expense. As you can imagine, I simply canceled my dispute. Real nice seller(being sarcastic).
I highly suggest you don't order from rcdamper
Sorry to vent, but I definately don't want any of you guys to get hood winked by this guy like I did.
Sincerely,
Ben
I have never done this before, but this ebay seller was so rude about my situation I feel the need to warn you guys. If you are looking to purchase Tamiya chassis upgrades for your drifter, mini, or any other Tamiya on-road chassis, do not order parts from rcdamper. I ordered a set of universal shafts and aluminum turnbuckles for my TL01 chassis, and neither product fit/worked properly without major modification and extra costs. The turnbuckles were all a lot too long, and the universal shafts are about 3mm too long. When I went to use the universals, they substantially limit the compression travel of the suspension. They won't even fit at all unless you remove the inside o-ring from the drive cup. I needed to spend another 12 bucks on new 3mm wide inside hub bearings to get these shafts to work almost properly. Anyways, I requested a 50% refund for my issues and efforts, provided rcdamper with 6 pics demostrating my issues and provided him detailed explanations of what I had to do to get these products to work properly in the chassis he advertised. He only reponded back once, asking for pics, and then never again. I created a dispute though paypal, and he still refused to offer up the 50% refund. Mind you this amounted to $19. He still refused which required me to take all of the items off of my car and send them back to him, at my expense. As you can imagine, I simply canceled my dispute. Real nice seller(being sarcastic).
I highly suggest you don't order from rcdamper
Sorry to vent, but I definately don't want any of you guys to get hood winked by this guy like I did.
Sincerely,
Ben
I am an RC Scalehead and I am proud of it!
- Brandon G
- Approved Member
- Posts: 2106
- Joined: Mon Oct 01, 2007 4:23 pm
- Location: Nashville, TN
- Been thanked: 3 times
Re: Bad ebay seller for tamiya chassis upgrades
Don't feel bad about venting. There are lots of shady cats out there, and we try our best as a community on this forum to warn others of the wrongdoings in hopes to prevent it from happening to other members.
Thanks for the heads up.
Thanks for the heads up.
- cyclepsych0
- Approved Member
- Posts: 189
- Joined: Wed Mar 19, 2008 1:21 am
- Location: San Marcos, CA
Re: Bad ebay seller for tamiya chassis upgrades
You might want to put it up in this section.....
http://www.rc10talk.com/viewtopic.php?f=49&t=9192
I agree with Brandon, there are alot of shady people out there. I appreciate the warning aswell.

http://www.rc10talk.com/viewtopic.php?f=49&t=9192
I agree with Brandon, there are alot of shady people out there. I appreciate the warning aswell.

"Relax. Alright? My Old Man is a television repairman....... Got this ultimate set of tools... I can fix it!!" - Spicoli
Re: Bad ebay seller for tamiya chassis upgrades
i noticed rcdamper the other day when i was searching for tamiya parts.
here's some good hong kong ebay sellers:
dinball/rcmart
rcsausagedog
rcmushroom
here's some good hong kong ebay sellers:
dinball/rcmart
rcsausagedog
rcmushroom
Re: Bad ebay seller for tamiya chassis upgrades
Thanks Kaiser,
I agree, I've ordered parts from rcmart and rcsausagedog with good results. I would have been fine with rcdamper too, even though the product didn't work properly, if he had owned up to it and tried to solve my issue. Unfortunately, instead he put his head in the sand, knowing in the end I would have to swallow my work, effort, and shipping costs by sending the stuff back to get any kind of a refund. Today I went to save him as a seller in ebay with a note to avoid, and I noticed he has labeled me as an ebayer that he won't sell too. I guess he doesn't like people calling him out on his products being bad, chinese copies. Why fix the problem when you can ignore it and continue to make money off of unknowing people.
Thanks again guys for your support.
Ben
I agree, I've ordered parts from rcmart and rcsausagedog with good results. I would have been fine with rcdamper too, even though the product didn't work properly, if he had owned up to it and tried to solve my issue. Unfortunately, instead he put his head in the sand, knowing in the end I would have to swallow my work, effort, and shipping costs by sending the stuff back to get any kind of a refund. Today I went to save him as a seller in ebay with a note to avoid, and I noticed he has labeled me as an ebayer that he won't sell too. I guess he doesn't like people calling him out on his products being bad, chinese copies. Why fix the problem when you can ignore it and continue to make money off of unknowing people.
Thanks again guys for your support.
Ben
I am an RC Scalehead and I am proud of it!
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 4 Replies
- 966 Views
-
Last post by Sixtysixdeuce
-
- 1 Replies
- 489 Views
-
Last post by shodog
-
- 3 Replies
- 499 Views
-
Last post by AYKBOBCAT
-
- 4 Replies
- 1062 Views
-
Last post by Asso_man!
-
- 5 Replies
- 1184 Views
-
Last post by THEYTOOKMYTHUMB
-
- 7 Replies
- 949 Views
-
Last post by ZED32
-
- 2 Replies
- 810 Views
-
Last post by Dadio
-
- 24 Replies
- 6300 Views
-
Last post by dave00beer
Who is online
Users browsing this forum: Ahrefs [Bot],
morrisey0 and 10 guests