Mark Westerfield wrote: ↑Thu Nov 12, 2020 4:36 am
Now that pin wheels are re-released...
Yeah, now you have two options. That is, if you have 3/16 axles.
Unfortunately, all my stuff is 1/4".
Traxxas 7171 wheels and Factory Works 1/4" hexes. Jconcept wheels for the front.
Thanks.
Now that you mention it, I had looked at the Traxxas wheels before but couldn't find any fronts that I liked to go with them.
I already have the Factory Works hexes on a couple cars, so I'm familiar with the minor work that they need. I also re-tap serrated M4 wheel nuts to 8-32.
I was getting ready to order a few sets from JC Racing but I might mix it up some.
Always looking for new and interesting ways to waste money.
I am so glad JConcepts re-released the 3/16 RC10 / B2 wheel. There were no wheels to be found and the few for sale were priced 3-to-5 times the normal cost. At that price, I’m afraid to place it on a car to race
Hey guys, I recently pulled my rc10b2 out of storage and had to order new tires due to mine being dry rotted and I quickly realized they didn't fit my stock wheels. I ordered the jconcepts wheels for my b2 but the rears don't seem to fit my tapered rear drive axle. Has anyone had this issue? Will attach photos for reference. I have had this car forever and I'm not sure if they are the original axles. Thanks in advance
Ah. I didn't even realize there were different size axles for this car. I'm assuming it would be easier to find a wheel that fits these than find the other axles. Parts seem to be scarce online for these cars.
Wilks wrote: ↑Sun Jan 31, 2021 9:26 am
Ah. I didn't even realize there were different size axles for this car. I'm assuming it would be easier to find a wheel that fits these than find the other axles. Parts seem to be scarce online for these cars.
See my posts above.
Factory Works hexes and Traxxas rear wheels.
Always looking for new and interesting ways to waste money.
Wilks wrote: ↑Sun Jan 31, 2021 9:26 am
Ah. I didn't even realize there were different size axles for this car. I'm assuming it would be easier to find a wheel that fits these than find the other axles. Parts seem to be scarce online for these cars.
See my posts above.
Factory Works hexes and Traxxas rear wheels.
Got it! Thanks for the info I'll be ordering them!
Here are a few pics of the JConcepts fronts and Traxxas rears on a couple cars.
The clear body car has Schumacher full spikes all around. The black car has Schumacher blocks on the rear and Traxxas Alias fronts. I may change the blocks to something else, as they are a little small.
Click on images for better resolution.
Attachments
Always looking for new and interesting ways to waste money.
In looking for a couple of sets of Hazard wheels, all I can find available anywhere (including manufacturer's site) is yellow, and a few sites I have been to are listing the white and black versions as Discontinued. Anyone know for sure if they are...
Last post
It looks like the yellow Hazzard wheels are available directly from JConcepts.
Per a suggestion on this forum I purchased some Jconcepts mono 2.2 rear wheels (JCO3404W), and some Jconcepts JCO3403W rear wheels. Both are pictured. Neither fit out of the box. I realized that I need the 3/16x3/8 bearing for the front, my original...
Last post
What I've done instead of buying a whole set of 3/16 CVDs is just swap out the 1/4 axle with a 3/16 and reuse the rest of the 1/4 cvd parts.
2A5A1BCF-7778-49DD-AA49-411519F137AD.jpeg F37FC254-8223-430A-9815-67A1012339E5.jpeg 9CFFFAF0-70B9-486D-A588-EE4A84BED815.jpeg
Looks like all 3 colors, white, black, and yellow are currently in stock. Nice to see they are for the 1/4 rear axle
Last post
2A5A1BCF-7778-49DD-AA49-411519F137AD.jpegF37FC254-8223-430A-9815-67A1012339E5.jpeg9CFFFAF0-70B9-486D-A588-EE4A84BED815.jpeg
Looks like all 3 colors, white, black, and yellow are currently in stock. Nice to see they are for the 1/4 rear axle...
Related topic, what's the current easiest way then to get 3/16 stub axles in rear with pin drive? All mine are dogbones stock 1/4 axles. I know JC racing will be out shortly with 3/16 universals and solve the problem but what else for now?
Hey guys,
I have both sets of front wheels, rc10b2 offset, and when measuring them, the jc racing wheels have 4mm more positive offset.
This is about what the b4 wheels are, I looked on Jc's website, and my wheels have the outer flange like in their...
Last post
I did some measuring on several of my cars. I don't have any JC Racing wide wheels, so take it for what it is.
Both of my cars with JConcepts fronts have a wider track width than any of my cars with JC Racing or vintage wheels (as well as 1.9...