RC10Talk - The Net's Largest Vintage R/C Community

My sons runner not quite finished, waiting on the electronics, he accidentally put positive in the neg slot and blew it up,whoops. I think i want to put a 10t body on it, motor is just mock to set shocks

Nice build, your son will have a lot of fun with it, or you!

NomadRacer wrote: ↑Tue Nov 27, 2018 6:23 am Nice build, your son will have a lot of fun with it, or you!

Thank you! I dont think you can see but i just put fresh cvs’s on there, it had cvd’s but i dont like them theres no retainer clip on them (cva’s) so if the set screw comes loose its game over, the pin comes loose and destroys your hub.

cva the clip can still move, or come off. some people would put a drop of ca on it. or both the cva and cvd you can put shrink tubing over it. shrink it.

alien3t wrote: ↑Wed Nov 28, 2018 3:20 am cva the clip can still move, or come off. some people would put a drop of ca on it. or both the cva and cvd you can put shrink tubing over it. shrink it.

I like the shrink tube idea, when i had the non-clip ones the sst screw came out,so the pin worked its way out an destroyed house aluminum hub, so i put glue on the pin and it workeda lil until i need to service it then it was a pain to dig out glue, so i like the dhrink wrap idea just cut it off when need to, thanks
All tips are welcome

A little update: added hobbywing esc quicrun 10bl160 (sensored)
Smc 5700mah 135amp 90c lipo stick
Hobbywing Quicrun 3650 8.5t sensored motor
Just need tx/rx now

Now i just need to know how to put a 10t body on this t4.3
Parts or modifications needed thanks

That Hobbywing combo is what I had mind also. Curious what you think of it!

broodenburg wrote: ↑Tue Dec 04, 2018 4:04 am That Hobbywing combo is what I had mind also. Curious what you think of it!

I haven’t used esc yet
I love the motor, but it was with the now discontinued xerun sct pro 120amp esc before and i loved the combo. I tried replacing but they dontsell if and the new version of that esc is to much money so i went with the cheaper quicrun series, but they say the motor is supposed to work better with the new esc so i will let you know soon i run it

? For you i just hooked up esc out of box and the fan worked then i unpluged it then pluged it back in and it no longer works, any ideas y?

I dont use a fan in my T3 so ....... Tried an other fan to check if it's that or the ESC?