Ofna 19034 hingepins on YZ-10/870C ?

[lifeIsAnalog]

Has anyone tried the Ofna 3x40mm hinge pins (p/n 19034) as replacements for the YZ-10 rear suspension arm pins? Mine are bent and now have teeth marks on them (the pliers, not mine).

They are a little longer than stock (40 vs 38.5mm) which is not a problem. I am more concerned about the diameter. On paper they should work, but I trust word of mouth confirmation a bit more

ofn19034.jpg (13.75 KiB) Viewed 979 times

ofn19034.jpg (13.75 KiB) Viewed 979 times

[lifeIsAnalog]

I'm almost convinced that the Ofna pins will not work.

I tried the hinge pins from my Traxxas Bullet. Length is perfect, but at 3mm diameter, they won't fit. So the YZ-10 pins are smaller in diameter (~2.5mm by my measurements).

Has anyone found suitable replacement YZ-10 rear suspension arm pins?

[DennisM]

The Touring car pins fits.
Yr-4

[lifeIsAnalog]

Good info, DennisM. I'll check it out today. A quick search only turned up one set, on eebaye. Made of titanium, so they're priced accordingly, but I'll keep that in my back pocket. I will also look at aftermarket.

[Justjoe]

check this link. the Ofna pins i used fit and there are pics so you can see how they fit.

http://www.rc10talk.com/viewtopic.php?f=29&t=16827

[lifeIsAnalog]

Set ordered! Even though they are a bit long, I can't complain at that price. Thanks Justjoe and DennisM for the tips! I like the turnbuckle idea Justjoe.

[lifeIsAnalog]

The Ofna 36170 pins arrive, and although a bit long (as expected), the diameter is perfect! Thanks again. Apparently 3mm is not 3mm with all manufacturers. Must be like shirt or trouser sizes

The rebuild continues...