You can of course mount those RPM long arms to any of your chassies, RPM included in their rear arms conversion kits a template to drill the two additional holes needed at the rear, just behind the bulkhead. You will also need to trim the chassis on both sides to accept travelling of the rear arms.
Your pink chassy is drilled and countersunk for both the 6 gear and the Stealth trannies...
Cheers
David
_____________________________________________
_____________________________________________
Come and visit the stable
Wow thanks for all the info, David!!! I was just worried as the chassis would have to be narrowed that some of the holes might get in the way...
You see I bought the Pink chassis to do an RPM front end and in a parts lot spotted I had the RPM rear arm mounts, then spotted Tulsa had the narrow chassis RPM rear arms for sale so things are spiralling out of control as per usual....
Wow, thanks, yes I believe I would need the template if you can find time to scan and email it to me, though there is absolutely no rush as I only won these items last night!
The later AE arms for the 10T, GT and T2 have the spacer for adjusting the wheelbase. The early AE white arms and the RPM arms dont. My question is lined up next to each other is Does the RPM arms line up with the short or long position or are they...
what arms are these, i opened them up new.. thought they were the normal 3 hole version, but they arent and i already lost the header card.. started assembling them when i noticed the difference
Last post
your exactly right highwayracer.. hinge pins are slightly loose but they are the exact fit... pretty funny. guess i could drill a bulkhead and use them if i wanted... ill just throw these on the bay
Please forgive my ignorance, I am mainly a yokomo man dabbling in unknown territories now:
I have been looking for some black arms to complement an impending CF DHawk build.
I wonder if you guys could tell me what is the difference between...
Last post
RPM molded Andy's parts. Richard Royall (RPM) did an interview a few years ago and mentioned that tidbit. Of course S&K eventually marketed Andy's parts.
I'm looking to replace the white wishbones on my 10T with the RPM ones, problem is i cant find anywhere in the u.k that stocks the fronts, rears, and rear hub carriers. I can only find rears.
I've checked tower and liquid rc but cant find the whole...
Last post
thanks for the heads up i must have read it to fast and thought it said gt2.
thanks
mike
Installed a set of RPM B4 arms on my B4.1. Haven't had a chance to run them, but def beefy compared to the stock front arms!
Before
After
Last post
The rpm arms were great on a loose loamy track. No problems whatsoever. On a hard packed Clay I just didn't like the way the truck drove and the rtr arms were even worse. It was a shame cuase the truck was unstoppable with the FT arms until they...
Maybe a rookie question, but did RPM make the team/widetrack front arms in white? Not the RPM worlds conversion type, standard wide track.
Last post
I am trying to find a set of rear Andy's arms in white but that full set of RPM arms would work. If you don't move on them Bob, please pass me the info.
