RC10DS - Gulf Livery Mustang

[LoboNYC]

Nice, trick DS - as expected from you

Any chance you could still space these wheels out (traxxas makes great, cheap, plastic hex spacers ) a bit more to better fill the fenders?

Paul

Thank you! and thank you for the traxxas hex tip as well. Im going to look into widening them out a little more.

3/23/19 - Just placed orders for 7mm, 9mm, 12mm, 15mm, and 20mm hexes. A little excessive with the variety but i like to cover my bases.

Just checked it out, yes Pinky is very cool!

Glad you liked Pinky. I have several different DS build pages...with more to come

[LoboNYC]

Well, I got a variation of wheel/hex extenders but was unable to use them due to screw threads. One side is standard and the other is metric. This was in order to move the wheels closer to the body rather.

Since none of the extenders worked for me i resorted to using the original Associated Mustang DS body. i cut, trimmed and mounted onto my DS. The DS will remain a long wheelbase and wide wheel track width setup. only the body was changed. I also mounted an HPI wing on the rear of the body.

i think it looks much better. What do you think?

[KidAgain]

That looks slick bud much better........................................

[LoboNYC]

That looks slick bud much better........................................

Thanks, the space between the wheel and body was starting to drive me nuts but I did not want to change the GT chassis or beadlock wheels. I wanted the long wheelbase and wide track to remain as is.

[Coelacanth]

Honestly, I like it without the wing. The rear part of that body is already swept up and would act like a spoiler...so unless it's purely to improve downforce, I'd lose the wing. Don't rice the 'Stang.

[LoboNYC]

Honestly, I like it without the wing. The rear part of that body is already swept up and would act like a spoiler...so unless it's purely to improve downforce, I'd lose the wing. Don't rice the 'Stang.

Totally understand your preference for losing the wing.

The associated mustang body does have that swept up rear unlike the HPI mustang body, which is where i got this wing from.

In my case, i do prefer the extra down force it will provide as i intend to run this one day.

[KidAgain]

I put a stadium truck type rear spoiler on my junk 2000 camaro body and now the car is glued when before off throttle or light braking would spin the car out at speed even the slightest steering input would upset the car, not anymore.

[Coelacanth]

I only brought up the wing comment because the car looked too nice to be a runner. If you're gonna run it, by all means wing it.

[LoboNYC]

I put a stadium truck type rear spoiler on my junk 2000 camaro body and now the car is glued when before off throttle or light braking would spin the car out at speed even the slightest steering input would upset the car, not anymore.

I learned the hard way to keep a wing on them had a corvette NTC3 spin out and hit a wall for lacking a functional wing.

I only brought up the wing comment because the car looked too nice to be a runner. If you're gonna run it, by all means wing it.

No worries, I truly appreciate opinions and ideas. In some cases, I'll even make changes due to those opinions.

[limestang]

Nice job, I like how you mixed in blue as others have mentioned. What brand wheels and knock-offs are you using - they are awesome.

Thanks Limestang

[LoboNYC]

Nice job, I like how you mixed in blue as others have mentioned. What brand wheels and knock-offs are you using - they are awesome.

Thanks Limestang

THANKS!!! Glad you like the blue mix. I have a deep blue associated exhaust i was thinking about using but it throws off the black and blue balance. i may or may not swap out the black paris pipe for a paris stilleto but im still undecided.

The wheels are RC4WD Shelby 1.9" Beadlock Wheels. The knock offs come with the wheels and are removable.

05/16/2019
On a separate note, i started messing with some HPI Home Improvement decals




I didn't like the way they looked (plus they were not meant for this body), so they were removed. I did keep the BASF, Pirelli, Champion, Red Wing Shoes, and Ford sponsor logos. Traxxas Receiver and 1600 mah receiver pack are standing by for install. All she last left to be finished are colors and paint scheme.

[LoboNYC]

UPDATE

I decided to do a GULF livery theme paint job on the mustang. I used Tamiya PS-24 fluorescent orange and PS3 Light blue for my primary colors and black for the lines. The knockoffs from the Shelby wheels were painted with Testors fluorescent orange enamel paint. The orange outer edge highlights on the wheels were done with a sharpie oil based orange marker. She is equipped with a receiver pack and is just lacking a receiver in order to be completed. Of course i have a traxxas receiver ready, just need the time.

Anyway, hope you enjoy the ending to this build. Let me know what you think...




















I think i will change title to Gulf Livery Mustang

[KidAgain]

Damn that looks sharp, in my opinion you got the hardest thing done which for me is paint scheme and painting the build phase is the fun part.

Put the blue pipe

[LoboNYC]

Damn that looks sharp, in my opinion you got the hardest thing done which for me is paint scheme and painting the build phase is the fun part.

Thanks!...I agree. The hardest part of a project is the paint scheme.

Preparing body with masking tape, deciding on patterns, deciding on colors, and waiting till the wife leaves for the day so i can paint by the kitchen window without incident.

blue pipe? I toyed with that idea but it threw off the black and blue balance.

[Incredible_Serious]

WOW!!!!

I see a walkover coming up soon in the Build of the Month contest..... which is great, because it gives me another month to plan!!!!

Great build mate, and the finishing with the body, cherry on top.

Alex