b4 cvd axles

[JosephS]

Does anyone know if the 7380 axles 3/16" mip for the t2/t3 /
customworks short can be substituted for the

b4 part 9598?

[scr8p]

Other than being shorter, so you can't run the aluminum wheel spacer between the pin and hub like the B4, they should be the same.

[JosephS]

Other than being shorter, so you can't run the aluminum wheel spacer between the pin and hub like the B4, they should be the same.

Thanks. I only saw the part number differences after I bought a set of axles. Would I just need some shims to run pins on that setup?

[scr8p]

So you have the B4 axles?

Yeah, you'll just have to add more shims. Or find the proper aluminum spacers.

[JosephS]

So you have the B4 axles?

Yeah, you'll just have to add more shims. Or find the proper aluminum spacers.

Opposite I have b4 bones and the customwoks axles. I'm gathering the parts for a b4 build.

[RC10th]

Ideally you'd want the longer B4 axles and the #9608 spacer.

Not sure what custom works has but alternatively you could use these from Jeff which is a readily available replacement for the #9608. Mind you the spacers won't work with the shorter axle.

https://www.ebay.com/itm/303748279630