RC10B4/4.2 slipper conversion for the Stealth 2.25 - parts list
- Orange
- Approved Member
- Posts: 890
- Joined: Fri Apr 24, 2009 12:42 pm
- Location: Chandler, AZ USA
- Been thanked: 1 time
Re: RC10B4/4.2 slipper conversion for the Stealth 2.25 - parts list
You will be able to cut down some of the part numbers on that list.
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXCBFG&P=7
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXCBFG&P=7
Re: RC10B4/4.2 slipper conversion for the Stealth 2.25 - parts list
Part in above pos. Has been on eBay for months. I acquired one from rctech 2 months ago from someone that already had it. It saves a few bucks.
- DMAT
- Approved Member
- Posts: 884
- Joined: Wed Mar 20, 2013 8:53 am
- Location: Baton Rouge, La
- Been thanked: 3 times
Re: RC10B4/4.2 slipper conversion for the Stealth 2.25 - parts list
think im gonna spend a little money on testing these things out. Any preference for which is easier to do?
- DMAT
- Approved Member
- Posts: 884
- Joined: Wed Mar 20, 2013 8:53 am
- Location: Baton Rouge, La
- Been thanked: 3 times
Re: RC10B4/4.2 slipper conversion for the Stealth 2.25 - parts list
sorry for the double post but has anybody tried the AvidRC triad slipper kit. would be nice to see an all in one solution for a topgear solution to the stealth tranny.
I guess a question about weather the b4.1 topshaft can work in a stealth tranny.
http://www.amainhobbies.com/product_info.php/cPath/1_25_1460_633/products_id/241376/n/Avid-RC-Stock-Triad-Slipper-Clutch-72T-76T
I guess a question about weather the b4.1 topshaft can work in a stealth tranny.
http://www.amainhobbies.com/product_info.php/cPath/1_25_1460_633/products_id/241376/n/Avid-RC-Stock-Triad-Slipper-Clutch-72T-76T
-
- Approved Member
- Posts: 711
- Joined: Sun Apr 15, 2012 11:20 pm
- Location: Bellingham, Wa
- Has thanked: 14 times
- Been thanked: 57 times
Re: RC10B4/4.2 slipper conversion for the Stealth 2.25 - parts list
What parts are the new worlds cars coming with as far as the slipper? I want those exact parts for my conversion. Which list represents exactly what I need to copy that?
- DMAT
- Approved Member
- Posts: 884
- Joined: Wed Mar 20, 2013 8:53 am
- Location: Baton Rouge, La
- Been thanked: 3 times
Re: RC10B4/4.2 slipper conversion for the Stealth 2.25 - parts list
its our b4 conversion. (I ordered a new stealth tranny and this is what was used)
asc9604 x2 (slipper hubs)
asc9603 x1 (slipper pads)
asc9601 x1 (topshaft)
asc7486 x1 (spring)
5-40 lock nut
The VTS conversion can be used but you only replace 1 side of the slipper. the otherside is still stock.
Heck, even the B5 setup appears to work too but dont quote me on that yet. Revolution design is making its own b5 slipper so hopefully they will cross check the parts for us.
asc9604 x2 (slipper hubs)
asc9603 x1 (slipper pads)
asc9601 x1 (topshaft)
asc7486 x1 (spring)
5-40 lock nut
The VTS conversion can be used but you only replace 1 side of the slipper. the otherside is still stock.
Heck, even the B5 setup appears to work too but dont quote me on that yet. Revolution design is making its own b5 slipper so hopefully they will cross check the parts for us.
Re: RC10B4/4.2 slipper conversion for the Stealth 2.25 - parts list
I'm doing this to my B&W Stealth CE. I noticed that the gear on 9601
is smaller than the one on the original top shaft, will that be a problem?
is smaller than the one on the original top shaft, will that be a problem?
"They call me the Breeze,.....I keep rollin' down the road."
Early six gear CE, black & white Stealth CE, RC10 classic, SC10 kit version.
Early six gear CE, black & white Stealth CE, RC10 classic, SC10 kit version.
Re: RC10B4/4.2 slipper conversion for the Stealth 2.25 - parts list
i dont know if it works but i just ordered that and a b4 top shaft for my rc10t stealth tranny. I will post my results and step by step pics.DMAT wrote:sorry for the double post but has anybody tried the AvidRC triad slipper kit. would be nice to see an all in one solution for a topgear solution to the stealth tranny.
I guess a question about weather the b4.1 topshaft can work in a stealth tranny.
http://www.amainhobbies.com/product_info.php/cPath/1_25_1460_633/products_id/241376/n/Avid-RC-Stock-Triad-Slipper-Clutch-72T-76T
- Bottom Feeder
- Approved Member
- Posts: 320
- Joined: Wed Nov 06, 2013 11:30 am
- Location: Virginia
- Has thanked: 10 times
- Been thanked: 23 times
Re: RC10B4/4.2 slipper conversion for the Stealth 2.25 - parts list
Smaller as in narrower, or smaller as in fewer teeth?MrBreeze wrote:I'm doing this to my B&W Stealth CE. I noticed that the gear on 9601
is smaller than the one on the original top shaft, will that be a problem?
Not sure about the former, but the latter should definitely NOT be what's you're running into. The 9601 fits most variations of the Stealth transmission. Are you sure yours is a 9601?
Re: RC10B4/4.2 slipper conversion for the Stealth 2.25 - parts list
I made a mistake. I did buy the 9601 top shaft. The gear on it
is darker in color than the original making appear smaller
I checked the fit and it's fine.
is darker in color than the original making appear smaller
I checked the fit and it's fine.
"They call me the Breeze,.....I keep rollin' down the road."
Early six gear CE, black & white Stealth CE, RC10 classic, SC10 kit version.
Early six gear CE, black & white Stealth CE, RC10 classic, SC10 kit version.
- BohemianBabyDev
- Regular Member
- Posts: 27
- Joined: Sun Nov 07, 2021 11:53 pm
- Has thanked: 28 times
- Been thanked: 3 times
Re: RC10B4/4.2 slipper conversion for the Stealth 2.25 - parts list
Heya what gear cover part# is that!?
I'm digging, I think I need one a those on my next project.
-
- Super Member
- Posts: 1512
- Joined: Thu Mar 23, 2017 5:31 pm
- Has thanked: 990 times
- Been thanked: 450 times
Re: RC10B4/4.2 slipper conversion for the Stealth 2.25 - parts list
Looks like the OP last posted in 2013, so I'll toss in a guess.BohemianBabyDev wrote: ↑Thu Feb 10, 2022 3:18 amHeya what gear cover part# is that!?
I'm digging, I think I need one a those on my next project.
It looks like
Team Associated gear cover 7461
- juicedcoupe
- Super Member
- Posts: 2975
- Joined: Sun Aug 16, 2020 4:05 pm
- Location: Pascagoula, MS
- Has thanked: 229 times
- Been thanked: 1737 times
Re: RC10B4/4.2 slipper conversion for the Stealth 2.25 - parts list
The current RPM covers clear the B4 slipper. BOKI (ebay) has some that look similar to original translucent ones but are redesigned for clearance.
Always looking for new and interesting ways to waste money.
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 4 Replies
- 1674 Views
-
Last post by sbednara
-
- 4 Replies
- 1264 Views
-
Last post by mdutcher
-
- 5 Replies
- 1095 Views
-
Last post by rc10uk
-
- 7 Replies
- 1161 Views
-
Last post by Grumbles
-
- 14 Replies
- 2745 Views
-
Last post by CBR240
-
- 11 Replies
- 1859 Views
-
Last post by soniccj5
-
- 14 Replies
- 2824 Views
-
Last post by davejr
-
- 4 Replies
- 1335 Views
-
Last post by GoMachV
Who is online
Users browsing this forum: No registered users and 7 guests