please tell me what i got myself into!

General discussion, builds/restorations, etc...

Moderators: scr8p, klavy69

beefytheroadrunner
Regular Member
Posts: 7
Joined: Sun Apr 13, 2008 10:48 pm

please tell me what i got myself into!

Post by beefytheroadrunner »

i've wanted a rc10 since i was a kid and now that im 28 i finally got one. a guy that i work with had a couple rc's that someone left at his place and time to get rid of them. well im the new owner of a traxxas sledgehammer and a rc10 that needs to be identified. both for free and both rip.
one burbon, one scotch, one beer. ok more than one beer!

beefytheroadrunner
Regular Member
Posts: 7
Joined: Sun Apr 13, 2008 10:48 pm

Re: please tell me what i got myself into!

Post by beefytheroadrunner »

try again
Attachments
Picture060.jpg
Picture060.jpg (161.98 KiB) Viewed 1965 times
Picture060.jpg
Picture060.jpg (161.98 KiB) Viewed 1965 times
one burbon, one scotch, one beer. ok more than one beer!

beefytheroadrunner
Regular Member
Posts: 7
Joined: Sun Apr 13, 2008 10:48 pm

Re: please tell me what i got myself into!

Post by beefytheroadrunner »

and another
Attachments
Picture062.jpg
Picture062.jpg (163.08 KiB) Viewed 1961 times
Picture062.jpg
Picture062.jpg (163.08 KiB) Viewed 1961 times
one burbon, one scotch, one beer. ok more than one beer!

User avatar
scr8p
Administrator
Posts: 16734
Joined: Tue Feb 07, 2006 9:46 pm
Location: Northampton, PA
Has thanked: 33 times
Been thanked: 1193 times

Re: please tell me what i got myself into!

Post by scr8p »

a free worlds car? :shock:

boy, ya gotta love that. :)

beefytheroadrunner
Regular Member
Posts: 7
Joined: Sun Apr 13, 2008 10:48 pm

Re: please tell me what i got myself into!

Post by beefytheroadrunner »

worlds car? whats that? is it a origanal buggy? if so whats the difference between it and a gold pan?
one burbon, one scotch, one beer. ok more than one beer!

User avatar
Mr. ED
Approved Member
Posts: 5483
Joined: Thu Dec 21, 2006 1:30 am
Location: Back @ home: Belgium
Has thanked: 62 times
Been thanked: 62 times

Re: please tell me what i got myself into!

Post by Mr. ED »

not an expert and neglecting the fine art of gradual eveolution, but the first things that jump to mind; better longer shocks, larger diameter wheels and fitting rubber, stealth transmission, graphite shocktowers, wide front arms, universal-joints...
absolutely good deal . RUN IT!

User avatar
scr8p
Administrator
Posts: 16734
Joined: Tue Feb 07, 2006 9:46 pm
Location: Northampton, PA
Has thanked: 33 times
Been thanked: 1193 times

Re: please tell me what i got myself into!

Post by scr8p »

read this article. it talks about the 4 main rc10's of that era.

http://www.rc10talk.com/viewtopic.php?f=7&t=455

beefytheroadrunner
Regular Member
Posts: 7
Joined: Sun Apr 13, 2008 10:48 pm

Re: please tell me what i got myself into!

Post by beefytheroadrunner »

1. what was the price difference back then 2. any idea on year 3.is it worth restoring to drive or hot rod it 4. does it look all origanial 5. is it from the same era as the gold pan thanks all
one burbon, one scotch, one beer. ok more than one beer!

User avatar
Dr. Robotnik
Approved Member
Posts: 1442
Joined: Wed Oct 11, 2006 11:05 am
Location: Nutterham, United Kingdom
Been thanked: 1 time

Re: please tell me what i got myself into!

Post by Dr. Robotnik »

1. This was the most expensive one at the time.
2. 1994-95 onwards.
3. Depends on the condition of the tub base. It looks in great condition. If the base is similar, restore and shelve. If it's very used, do as you wish.
4. Yes.
5. The gold pan came out in 1984. This has ten years of evolution.

Basically I am sure someone will swap you for whatever you want in similar condition (or ebay it and buy what you want)...

Welcome to the board.

User avatar
Mr. ED
Approved Member
Posts: 5483
Joined: Thu Dec 21, 2006 1:30 am
Location: Back @ home: Belgium
Has thanked: 62 times
Been thanked: 62 times

Re: please tell me what i got myself into!

Post by Mr. ED »

just noticed: is it just my impression or is this one of the lightened tubs: looks like it was milled before anodising.
That'd make it pretty desired , I think.
(should stay away from rc10 threads, sorry)

User avatar
mrlexan
Approved Member
Posts: 6250
Joined: Wed Dec 06, 2006 6:49 pm
Location: Upstate SC
Been thanked: 12 times

Re: please tell me what i got myself into!

Post by mrlexan »

Erik, All Worlds chassis tubs are done that way.
I am not here cause I am playing photographer and on my mountain bike.
www.gojammedia.com

User avatar
Synergy
Approved Member
Posts: 1787
Joined: Sat Dec 23, 2006 5:57 am
Location: North East England
Has thanked: 127 times
Been thanked: 72 times

Re: please tell me what i got myself into!

Post by Synergy »

I wasn't going to shout but

A WORLDS CAR FOR FREE

OH COME ON


Welcome to the board :D you are officially the luckiest member 8) now go stand in the corner with purpletimbo :lol:
Experience is that marvelous thing that enables you to recognize a mistake when you make it again.

Here's my TC Showroom
http://www.tamiyaclub.com/showroom.asp?id=18028

cmain
Approved Member
Posts: 65
Joined: Sat Mar 15, 2008 12:34 am
Location: ST. LOUIS

Re: please tell me what i got myself into!

Post by cmain »

looks like they ran oval with it or something the shocks are mounted in on one side out on the other :?

beefytheroadrunner
Regular Member
Posts: 7
Joined: Sun Apr 13, 2008 10:48 pm

Re: please tell me what i got myself into!

Post by beefytheroadrunner »

thank you all for helping me out. and i didnt even notice the shocks. now one last question, if i do run it and break something what do i order the parts as going on? also some people say shelve it but when i was a kid i wanted one very bad but couldnt find the cash. well im not giong to bash it but it will be driven on the road when im done cleaning it up. thanks again
one burbon, one scotch, one beer. ok more than one beer!

User avatar
call-911
Approved Member
Posts: 553
Joined: Thu Mar 27, 2008 12:32 am
Location: Mokena, IL USA
Has thanked: 1 time

Re: please tell me what i got myself into!

Post by call-911 »

If you don't really care of the vintage, if you post it on ebay you could probably get a few of the original RC10s for even money. You could then shelve one, beat one up, and use the third for parts. :D
Keith C

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

Return to “RC10 Buggy Forum”

Who is online

Users browsing this forum: No registered users and 14 guests