RC10-YZ-2 hybrid is turning into a truck!

[Headling]

Rear driveshafts sorted, b4 axle, mip t4 shaft, axle shims and a Tamiya 12mm hex and we are business!

[Headling]

Scored this front brace off eBay for £4 and the front end is nearly complete!

Carbon tube in the pic is for me to make up some nose tubes!

[Headling]

Nose plate powder coated to match the main chassis

[Headling]

Rebuilt the rear shocks and got one mounted, one had a bent shock shaft so waiting for some more to turn up

[Headling]

Sorry for the upside down pics! Bloody I phone! If you click on them they are the right way round!

Quick question, any benefit of using buggy steering set up/Bell cranks over the truck ones??

[Headling]

Steering done, will get some dye and do it all black

[Headling]

The front end is on!!

[Headling]

Found some NIP front proline T2 wheels

[RC10th]

Looking good, can't wait to see the finished results.

Ditch the 10T bellcranks, they are horrible on anything other than a shelfer. Use the worlds steering as it's much better, especially with bearings. Also, pick up some button head 8/32 screws to use for the steering and that will be one serious truck!!

[Headling]

Thanks! Appreciate the input, will get the steering swapped over

[Headling]

These turned up, took a flyer and they fit a treat! (Use metric m3 bolt)

[Headling]

As per the advice I’ve fitted the worlds steering set up now

Took the grinder to some CS washers so the Ali AE screws don’t take too much of a hammering

[Headling]

Servos in

[Headling]

Got the parts to re build the rear shock so here is how she sits at the moment

Going to get the esc/rx in it this weekend and decide on a body for it, prob j concepts retro style one

[Headling]

Got the soldering iron out this weekend, tyres and a body and we are in business!