Do any of you have a suggestion or a technique for bleeding the front shocks to match as small as they are? I have the newer style V2 small bore shocks with the bleeder screw caps on. I can get the back shocks easy and perfect. But the fronts are alluding me. I would value all of your combined wisdom. Thanks
Don't know if people will find this useful, but I wanted some 3mm thick carbon fibre shock mounts to replace/save the originals on my RC10 Worlds car. I also decided I wanted to go with a taller front mount to accept Associated 0.89 shocks and keep...
Last post
Very flash,for me i like the two rows of holes with the tower shaped like the first pics i got one off atlas ages ago that i like but obviously hard to get so nice work for getting them made an nice of Fibrelyte to list them for sale.. Tha hybrid...
What are you guys doing to assemble the shock caps to the body with the O-rings. The ones that I have seem to be a little large and are just spit out of the side when twisting the cap down. I have seen shocks in the past that instead have Teflon...
Last post
Guys - Thanks for the help.
We were down in Hallett Oklahoma running the Porsche so I was working on these in the motel room and had left the instruction manual at home.
I bought new O-rings in case I nicked the one trying to install them in the...
Hey all, looking for a thread about a custom car like the rpm worlds conversion. It was a guys name I think. There were a couple found that were posted about, I believe someone thought it was a b2. I just can't think of the name.........Any help is...
Last post
ahhhh...... that one. i was just think about the flipped front tower. :wink:
A little side project.
I’ve had this in a drawer for a while and decided to get it cleaned.
It’s quite impressive what a thorough clean can result in.
Boiling water.
Simple green.
Toothbrush and pipe cleaners.
Brass brush on the Dremel and...
Last post
Final piece added.
The correct RPM springs.
If you need a pair, just send an email to RPM. They still have a stash.
I'm looking for a bit of education, I think I might see the odd rolley eyes for this one :roll: :oops: Anyway how does the numbering work for shocks, is it related to the length, I thought 0.71 = fronts, 1.02 = mid length and 1.32s = rears :? I'm...
Last post
to this day i still get all mixed up on the frigging way ae labeled thier shocks.
I'm pleased I'm not the only one :? Thanks for the info chaps. :D
best srb front shocks!
i was running the stock shocks on the front end / that worked well untill the front springs broke from wear points. i use the car alot with 18650 batteries....
i got the rcchannel front shocks but the springs are not great...