Are any of you planning on adding big bores to your cars?
I'm struggling with keeping myself from adding them since I have a new spare set. I do like the shocks it comes with though so I might just keep it stock for a little while except for some titanium turnbuckles and some JCONCEPTS goodies.
ca-rj wrote:The big bores are 12mm while the V2's are 10 or 11 (can't remember exactly). They seem to make the largest difference when landing off of jumps.
More cushion for the pushin'
I miss brushed motors in that hazy, everything seemed better when I was a kid, kind of way.
yeah, I believe 12mm and 10mm. the difference boils down to giving you a little finer adjustment range for a given spring and damping oil due to higher volume of oil/larger piston and larger diameter spring.
You might be able to do the middle option and just run the V2 shocks with big bore springs, though I wonder if the springs will be too long for the shorter .71 front shocks (those are B4 shocks in the picture).
RC10 Short Arm | Novak Tempest ESC | Tamiya Torque Tuned 25T | Savox 1258 | Stealth Trans w/ Exotek Slipper Eliminator (geared 24/81)
RC10B3 | HW Just Stock Club Spec | Reedy 13.5 | Savox 1258
A little side project.
I’ve had this in a drawer for a while and decided to get it cleaned.
It’s quite impressive what a thorough clean can result in.
Boiling water.
Simple green.
Toothbrush and pipe cleaners.
Brass brush on the Dremel and...
Last post
Final piece added.
The correct RPM springs.
If you need a pair, just send an email to RPM. They still have a stash.
I've putting together an all-in-one kit for those that want to get their boxart rere Kinwald cars a little closer to the original, or for those who are looking to make a correct replica. The kit will contain:
1 - Front shock tower in 2.5mm 3k woven...
Last post
I kinda doubt it. Too high of a material cost and I doubt the demand is there to make it worthwhile.
I need some help remembering the details from back in the day. So I have an RPM kit still in the bags never opened and I just don't have any love for it as an RPM car. Does the RPM kit actually duplicate a certain one off car or are some of the...
Last post
yes, I had one of those too bitd, flipped the front around to put the tower in front, still have some of the og deck standoffs in my box. I never detailed it to be like masamis but that is how I am leaning. I guess it's just a matter of committing...
I was just wondering if anyone is still making these chassis kits, either the NIX91 or the Justin/Fred version? Maybe someone has a spare that they'd like to sell or trade?
Thanks in advance
Last post
Actually, as another option, if you order a full set of 91 Stealth parts (Niki's for example) and this book by Steve Husting (the photos provide an excellent reference), you have pretty much everything needed to design your own chassis plates. It's...
Hey guys, recently I've been gaining interest in building my own Worlds edition RC10, however, the only thing I can go buy at this point is pictures of other peoples rides I've found on the net. Could we get a Do It Yourself thread going here with...
Last post
Yep is white, I would prefer black though. I'm kind of looking to do a What if I was Masami's teammate :mrgreen: