I've got an original 427 Cobra sitting in my garage. I only want to look at it, not drive it for fear of damaging it or putting too many miles on it.
Then one day I buy a 427 Cobra kit car and beat the piss out of it because I can, realizing that I still have my beautiful original at home.
Those who love to restore original RC10's with original parts can still have the thrill of searching high and low for original parts.
Only people looking to make a buck on original RC10's would be upset about the re-res in my opinion.
toyowner wrote:I totally agree with those who feel angry about this being a one-off money grab. I still have an original still in shrink wrap. There is no authenticity to these kits. It like knowing you have counterfeit art on your wall. Boo AE. Or really Boo Thundertiger
I was just looking over my Classic and it's chassis is showing the signs of daily running on the street, grass, park, track, ect. I plan to race my Worlds car as well. It seems such a shame to put them up on a shelf when they run so well.
vintage AE wrote:I can't wait for the piss beating of a Worlds car and not worry about the scratched chassis and broken parts
RC10 Short Arm | Novak Tempest ESC | Tamiya Torque Tuned 25T | Savox 1258 | Stealth Trans w/ Exotek Slipper Eliminator (geared 24/81)
RC10B3 | HW Just Stock Club Spec | Reedy 13.5 | Savox 1258
ca-rj wrote:I was just looking over my Classic and it's chassis is showing the signs of daily running on the street, grass, park, track, ect. I plan to race my Worlds car as well. It seems such a shame to put them up on a shelf when they run so well.
vintage AE wrote:I can't wait for the piss beating of a Worlds car and not worry about the scratched chassis and broken parts
That's why I'm spending the extra cash and getting two of each
Same here and I don't even race RC much. Kart racing will halt all summer time RC. But it will be nice to have a race ready NEW RC10 and one on the shelf. I never had a Worlds car so I figured why not get two since they are affordable? As of right now I have a bunch of old parts to keep my current batch of cars up but just knowing AE has my back on replacement parts is reassuring as my shelf cars have a tendency of making track appearances.
Notice the guys that are upset about The team car re-release already own A original;).. I have a Salvador Dali print, it doesn't make the original worth any less.. I also have A-stamp gold tub, and when I bring it to a event everyone knows it's not a replica immediately! If anything the younger guys know what it is, because of the classic rerelease.
Let's not forget we are talking about a TOY car, not a 427 Cobra. Comparing the two would be apples to steak...
Or rather apples to, well, a 427 Cobra.
Yeh AE should be congratulated shows they care,vintage is the way of the future like it or lump it.. I for one think it is trukn great an emplore other rc companies to get in on it aswell... Not all of us will agree but could be worse,they could re re those hidious hypercolor t shirts or the old so called mobile phones the size of bricks . I am just happy plebs like me, can after few months of saving get a re re,it would take me a year otherwise an something else always comes up
vintage AE wrote:I can't wait for the piss beating of a Worlds car and not worry about the scratched chassis and broken parts
same here, i'm seriously considering building one to race outdoor in mod buggy. our big outdoor track can get a little bumpy and the old cars really soak it up.
during the vonats weekend my 17.5 powered 5link jrx2 schooled the mod buggy class, i think a worlds car will do the same. maybe in long wheel base w/ some .89 front shocks.
Tim, question as I'm now building my ReRe 6 gear...can you see if someone can do better QC because I'm missing the spline plate from my classic kit. Would really suck to get the Worlds and be missing, say the rare outdrive!!!
Johnboy72 wrote:Tim, question as I'm now building my ReRe 6 gear...can you see if someone can do better QC because I'm missing the spline plate from my classic kit. Would really suck to get the Worlds and be missing, say the rare outdrive!!!
Similar to what happened to Chris (Rouge), hope mine is complete since I haven't open it.
“It is more shameful to distrust our friends than to be deceived by them.”
― Confucius
Yeah I put a stealth in my classic and left the new 6 gear unopened in the box. Got Chris' aluminum case in yesterday and was thinking of starting on it after pt. But no spline plate. Put an old one in and doesn't quite line up in the case. Would've been nice to have the new one. Just hope the Worlds car has no issues.
It's pretty simple really if you think about it. If you have any issues at all with the re re cars don't buy them problem solved. While we're out racing bashing or whatever with our re re cars those who choose to can sit home and roll the originals around on the living room floor!!
I have many original rc10s of all varieties but I'm still buying two world's re re cars.
thanks Tim and associated keep them coming i recently built three woin cars for friends to run. With the new parts available they can't get enough of the 10s. Seems as of late our 1/8 racers and sc 4x4s have been sitting in the gear bag while we remember how much fun rc is and was back when it was about just banging wheels .
Johnboy72 wrote:Tim, question as I'm now building my ReRe 6 gear...can you see if someone can do better QC because I'm missing the spline plate from my classic kit.
did you check in the package with the motor plate?
A little side project.
I’ve had this in a drawer for a while and decided to get it cleaned.
It’s quite impressive what a thorough clean can result in.
Boiling water.
Simple green.
Toothbrush and pipe cleaners.
Brass brush on the Dremel and...
Last post
Final piece added.
The correct RPM springs.
If you need a pair, just send an email to RPM. They still have a stash.
I've putting together an all-in-one kit for those that want to get their boxart rere Kinwald cars a little closer to the original, or for those who are looking to make a correct replica. The kit will contain:
1 - Front shock tower in 2.5mm 3k woven...
Last post
I kinda doubt it. Too high of a material cost and I doubt the demand is there to make it worthwhile.
I need some help remembering the details from back in the day. So I have an RPM kit still in the bags never opened and I just don't have any love for it as an RPM car. Does the RPM kit actually duplicate a certain one off car or are some of the...
Last post
yes, I had one of those too bitd, flipped the front around to put the tower in front, still have some of the og deck standoffs in my box. I never detailed it to be like masamis but that is how I am leaning. I guess it's just a matter of committing...
I was just wondering if anyone is still making these chassis kits, either the NIX91 or the Justin/Fred version? Maybe someone has a spare that they'd like to sell or trade?
Thanks in advance
Last post
Actually, as another option, if you order a full set of 91 Stealth parts (Niki's for example) and this book by Steve Husting (the photos provide an excellent reference), you have pretty much everything needed to design your own chassis plates. It's...
Hey guys, recently I've been gaining interest in building my own Worlds edition RC10, however, the only thing I can go buy at this point is pictures of other peoples rides I've found on the net. Could we get a Do It Yourself thread going here with...
Last post
Yep is white, I would prefer black though. I'm kind of looking to do a What if I was Masami's teammate :mrgreen: