B3 Tyres on Worlds Car Parts

[JPAE07]

I just did the B2 Conversion on my first graphite. If you want to use the original hub carriers, you can use:

Associated bearing part No: 9277 3/16 x 3/8 Flanged Ball Bearing @ $15.00 per pair

Hope this helps any looking to use their old hub carriers.

[AYKBOBCAT]

I have truck carriers as well as the old ones. I don't mid changing.. but I thought the B2 wheels were tough to find. Are they for 2.2 wheels?

[scr8p]

you need to use the NITRO evader rear wheels.

[scr8p]

I just did the B2 Conversion on my first graphite. If you want to use the original hub carriers, you can use:

Associated bearing part No: 9277 3/16 x 3/8 Flanged Ball Bearing @ $15.00 per pair

for future reference, this is THE place to get bearings. you can't beat $1.00 each.

http://www.avidrc.com

[AYKBOBCAT]

OK cool thanks!

So are the fron evader wheels the same for nitro and electric? Also, are these wheels nilon? are they dyable? some colors ar cheaper but I want black wheels anyway... so whatever color I would have to dye them.

Thanks

[scr8p]

i believe the fronts are the same between the gas and electric version. i've been wanting to get a set of them the last couple time i ordered from tower, but i keep forgetting about them.

i'm not sure what they're made out of, so i don't know if they're dyeable.

[AYKBOBCAT]

I just compared the part numbers from the Duratrax site (exploded views) front wheels are the same. Rears are different.

I'm assuming the fronts are 2.2?

[AYKBOBCAT]

What about the Jammin CRT5 wheels? Isn't that a 1/12 truck?

According to Tower the wheels are 2.4 and use hexes. So I suppose once can strech 2.2 wheels to fit on those?

[JPAE07]

Scr8p,

Thanks for the link. I'm learning as I go on resto's. I was in a rush after over spending trying to get the B2 wheel concept to work. I think I paid $40 just for the MIP cvd's (since the LHS only had the MIP B2 cvd's in pieces). Next time I will be more patient.

If anyone knows the link to the right Duratrax front and rear wheel for the B2 wheel setup, please post the link.

[JK Racing]

What about the Jammin CRT5 wheels? Isn't that a 1/12 truck?

According to Tower the wheels are 2.4 and use hexes. So I suppose once can strech 2.2 wheels to fit on those?

The Jammin's are great. Just mounted a set today. They are 2.2, and with the HPI adaptors, they fit just fine. If you want an easy/cheap way to mount current tires to old RC10s, I feel this is the best bet...

[AYKBOBCAT]

COOOL!!! Are these nylon or plastic?

[JK Racing]

Dunno, they feel nylon-ish and are available in white/yellow.

[AYKBOBCAT]

So what are the yellow front on the buggy on the picture? They match with the Jammin's rears...

[AYKBOBCAT]

I suppose those are the ones?

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXSEF3&P=7

[JPAE07]

I should know this but I am trying to recall the size of the front wheel bearings for the b2 wheel on the rc-10? I i think its an unflanged 3/16 x 3/8. Can anyone confirm this?