RC10 wheel colours
RC10 wheel colours
I have found lots of front RC10 wheels made by Associated in black. But no rears in black yet. I just wanted to check - did they make rears in black? (For the buggy, NOT the truck).
Thanks
Thanks
GARBO 1/8
- GoMachV
- Super Member
- Posts: 11376
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 838 times
- Been thanked: 2502 times
Re: RC10 wheel colours
Three piece, one piece, truck and buggy, front and rear were all made in black, yellow, and natural at one point. Just add a "B" or a "Y" to the part number for the colors
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
Re: RC10 wheel colours
Thanks!
I have some 2.175" front three piece on the way now. So the front is sorted. I guess I can put 2.2" tyres on there as it is almost the same size.
Rears...
But if I wanted three piece rears it seem the TQ10 rear wheels were only 2". So I guess that limits me to ancient expensive tyres?
Or I could go for modern 2.2" B2 rear wheels as I already have spare B2 universal joints. Did the B2 rims come in black too?
I have some 2.175" front three piece on the way now. So the front is sorted. I guess I can put 2.2" tyres on there as it is almost the same size.
Rears...
But if I wanted three piece rears it seem the TQ10 rear wheels were only 2". So I guess that limits me to ancient expensive tyres?
Or I could go for modern 2.2" B2 rear wheels as I already have spare B2 universal joints. Did the B2 rims come in black too?
GARBO 1/8
- jwscab
- Super Member
- Posts: 6507
- Joined: Wed Jan 28, 2009 9:42 am
- Location: Chalfont, PA
- Has thanked: 10 times
- Been thanked: 454 times
Re: RC10 wheel colours
yes, b2/b3 wheels are/were available in black. alternatively, you could dye white or yellow wheels black.
you can also use losi step pin 2.0" tires on tq rims:
http://www.amainhobbies.com/product_info.php/cPath/1_26_2338_2339_213_2991/products_id/5090/n/Losi-Step-Pin-20-Rear-Buggy-Tires-Silver-2
you can also buy JC racing wheels that are 2.2" and fit on 1/4" axles, though they are 5 spoke. EDIT: Nevermind, I think you already have those based on pics in your other thread.
you can also use losi step pin 2.0" tires on tq rims:
http://www.amainhobbies.com/product_info.php/cPath/1_26_2338_2339_213_2991/products_id/5090/n/Losi-Step-Pin-20-Rear-Buggy-Tires-Silver-2
you can also buy JC racing wheels that are 2.2" and fit on 1/4" axles, though they are 5 spoke. EDIT: Nevermind, I think you already have those based on pics in your other thread.
Re: RC10 wheel colours
Thanks, very helpful !
Yes I am going for flush original aero / dished style wheels now. But they have to be black. Fronts are sorted. Whatever black rears pop up for sale I'll just get the correct tyres / UJs to match. Thanks again.
Yes I am going for flush original aero / dished style wheels now. But they have to be black. Fronts are sorted. Whatever black rears pop up for sale I'll just get the correct tyres / UJs to match. Thanks again.
GARBO 1/8
- klavy69
- Moderator
- Posts: 5153
- Joined: Thu May 29, 2008 4:11 pm
- Location: Fulton, IL (Land of one stop light but we DO have a windmill!)
- Has thanked: 571 times
- Been thanked: 270 times
Re: RC10 wheel colours
I wanna say there were some black buggy rears (not sure if 3 pc or not) in the b/s/t section awhile back. Would be at least on page 2 by now if not pruned. Can't remember who but remember thinkin I should pick them up before someone else did since I don't see black rear wheels as much as black front wheels. Might be worth a shot checkin some older forsale threads though...
Todd
Todd
Peace and professionlism.....Kabunga signing off!!!
Re: RC10 wheel colours
Thanks but those have sold. If the buyer is not going to use them I'll pay a bonus
Does anyone know what REAR axle / wheel hole size the TQ10 has?
Does anyone know what REAR axle / wheel hole size the TQ10 has?
GARBO 1/8
- jwscab
- Super Member
- Posts: 6507
- Joined: Wed Jan 28, 2009 9:42 am
- Location: Chalfont, PA
- Has thanked: 10 times
- Been thanked: 454 times
Re: RC10 wheel colours
no, the hole through is the size of a #8 thread OD, 0.164", or somewhere close to that. Then you have the taper on the reverse side that goes up to 1/4" in the pin area.
Re: RC10 wheel colours
Thanks guys.
I am going to hold out for B2 wheels as I have a load of new MIP B2 CVDs now.
I am going to hold out for B2 wheels as I have a load of new MIP B2 CVDs now.
GARBO 1/8
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 5 Replies
- 1710 Views
-
Last post by Curtmcgirt
-
- 16 Replies
- 1927 Views
-
Last post by DennisM
-
- 4 Replies
- 792 Views
-
Last post by aip47-2008
-
- 0 Replies
- 629 Views
-
Last post by j.costick
-
- 21 Replies
- 1241 Views
-
Last post by LowClassCC
-
- 0 Replies
- 581 Views
-
Last post by j.costick
-
- 1 Replies
- 691 Views
-
Last post by minimini
-
- 4 Replies
- 769 Views
-
Last post by JPAE07
Who is online
Users browsing this forum: No registered users and 69 guests