please can you show me how do you install the rear wing, and what wing mount are you using.
thanks in advance.
I got the idea from another member on this forum. Essentially, I am using standard RC10B4.1 wing mounts. Screw them into the shock tower, which BTW, mine are from RC Carbon Works and they come with holes already drilled into them. I just used on of the holes for each wing mount. The bottom of the wing mount will rest on the stealth tranny brace. This is where it doesn't look too professional, but it works for me. I then cut a hole in the back of the body to allow for the wing mounts to pop through.
Hope that this helps.
I am glad that you like the build. I am really digging these projects.
mmmmmmm...
I was thinking do the same but I believe if I drill a hole on the metal housing of the plate of the tranny and past true the holes frm the wing mount with a piece of metal tubing as a spacer its gone make it stronger ..... my 2 cent.
im on the process and I have the carbon tower as your but shorter version -3 mm im gone lower the body as much I cant to make it look sleeker like the new b4 also I try a b4 body and I cant make it look nice too will see later on hope everyone like it!!!!!!
im using v2 shock from b4 longer frt shorter back.
Picture 071.jpg Picture 070.jpg Picture 072.jpg Picture 073.jpg
This is my Gold pan runner, got in from fee-bay this spring along with another one a few weeks later. I took both of them apart and put the best parts into this one, now I'm looking...
Last post
there is a thread with all the info you'll need about running modern rubber on this buggy here:
a lot of good info in here also:
the second one is mostly for those builds allready set up but it has alot of links to their builds and alot of...
Hi fellas, I recently purchased a lot of good deals on RC10s thru Ebay. I had really good luck finding mint stuff at reasonable prices. In the aftermath of all the extra parts I ended up with plus some extra used chassis I had from my previous...
Last post
Hmmmm
I have an old Tamiya Monster Beetle body at home. Perhaps i should try to build one of these fo playing around..
My new project. I just picked-up this small lot over the weekend , it was listed for $50 on Craiglist. The buggy is in pretty good shape and just needs a good cleaning. Looks like the off-road tires were not used , also came with a wing and I...
Last post
Sway bar problem fixed with a paper clip , just have to order a body from Tower to finish the build. Time to put the foams and bumper back on and take a spin :D
I recently picked this up from a FB post after wanting a 10T since the 90's. Plan is to go through it and get it running on modern electronics.
z_IMG_3343.png z_IMG_3344.png z_IMG_3348.png
It looks like an RTR to me that someone has been...
Last post
front bumper looks rpm sc10t-ish...or traxxas rpm slash. picture really isn't good enough for me to see it straight on so its guessing.
Picked up this lightly used b2 roller that I tore down cleaned up and added new front tower and new rear tires and bearings to the steering. I will replace some other parts as I go as well as some of the hardware.
Last post
That LRP is sweet. I'd love to find one someday. Novak Hammers seem hard to find now as well.
this is my project im on building iv cut the chassis down drilled it and painted it im gona put 2 bars down the middle for strength. parts on order b44 cv's rpm gt rear hubs and toe in blocks rpm front carriers not to sure about the...
Last post
Hey, looking real good! I bet thats going to be capable of kicking some serious B4 Ass 8)
As I mentioned in the intro post, I got this car for $50 from the previous owner who turned out to be a meth addict, so i probably saved it from a worse fate.
I had it sitting in storage for 10-15 years and dug it out. Reasons for digging it out...