Yeah, after running it few more times yesterday in a place where I could really open it up, it runs plenty fast enough for me. I've only had it on pavement so far and I can see where it would not get a lot of traction on the dirt with the power it has now. Also after watching some of the videos on youtube of these on dirt, they appear to have major traction problems and seem to do a lot of spinning out on take off. I'm going to leave it as is for now and just enjoy it. I'm not going to put it on dirt until I can find a body for it.Chris K wrote:From my experience with the GT (pretty much from day one with either the Dudgeon or the original GT) the biggest problem with the trucks was balancing rear grip with a reasonable (OK, semi reasonable) (OK, huge) amount of horsepower. The .12 engines always produced LOTS of power and therefore finding LOTS of rear grip was always an issue. Hence the restrictor - to settle the little feller down to a dull roar.... on dirt where it was designed to be run.
AND, keeping with most of our philosophy that fast is good, stupid fast is even better hooking these trucks up ON DIRT was a nightmare! And, I honestly believe that if we had the tire compounds available to us then that we have today the GT class would still be flourishing.... BUT, in my opinion, it's unlikely to return and these vehicles should be preserved and cherished for the ground breaking vehicles that they are...
RC10GT I picked up today...
-
- Approved Member
- Posts: 98
- Joined: Sat Apr 07, 2012 8:57 pm
- Location: Portland Oregon
Re: RC10GT I picked up today...
RC10talk.com is like a bad accident, I just can't stop looking at it...
- klavy69
- Moderator
- Posts: 5204
- Joined: Thu May 29, 2008 4:11 pm
- Location: Fulton, IL (Land of one stop light but we DO have a windmill!)
- Has thanked: 628 times
- Been thanked: 294 times
Re: RC10GT I picked up today...
cautiousone wrote: I love your attitude, soon as one of the neighbors sticks a for sale sign in the yard, I'll let you know. Maybe you can move in and be my new neighbor?


or as in my last place...too many 2 faced backstabbing idiots


Todd
Peace and professionlism.....Kabunga signing off!!!
- slotcarrod
- Approved Member
- Posts: 4415
- Joined: Tue Nov 25, 2008 10:57 pm
- Location: Calgary Alberta Canada
- Has thanked: 1 time
- Been thanked: 45 times
Re: RC10GT I picked up today...
But that is why you have a proportional throttle servo!cautiousone wrote:Yeah, after running it few more times yesterday in a place where I could really open it up, it runs plenty fast enough for me. I've only had it on pavement so far and I can see where it would not get a lot of traction on the dirt with the power it has now. Also after watching some of the videos on youtube of these on dirt, they appear to have major traction problems and seem to do a lot of spinning out on take off. I'm going to leave it as is for now and just enjoy it. I'm not going to put it on dirt until I can find a body for it.Chris K wrote:From my experience with the GT (pretty much from day one with either the Dudgeon or the original GT) the biggest problem with the trucks was balancing rear grip with a reasonable (OK, semi reasonable) (OK, huge) amount of horsepower. The .12 engines always produced LOTS of power and therefore finding LOTS of rear grip was always an issue. Hence the restrictor - to settle the little feller down to a dull roar.... on dirt where it was designed to be run.
AND, keeping with most of our philosophy that fast is good, stupid fast is even better hooking these trucks up ON DIRT was a nightmare! And, I honestly believe that if we had the tire compounds available to us then that we have today the GT class would still be flourishing.... BUT, in my opinion, it's unlikely to return and these vehicles should be preserved and cherished for the ground breaking vehicles that they are...



Anyway, as far as tuning. Start with oem settings as there are many variables, like fuel and content, altitude, temp, barometric pressure and type of air filter, or how clean it is, as well as pipe, all this off the top of my head, there are many more! After a proper break in! You want to get a good crisp bark off the low end, this is mostly with your low speed needle. (buy a temp gun) It should scream (WFO with NO BOGGING) with out getting over 240-280F. You want to have a nice average temp of 220-240F (this is with your high speed needle) . Use OS #8 glow plugs in that engine, they work the best hands down in most engines! You want a nice slow idle so the clutch will not try to engage off throttle! Have fun and use throttle control!

Rod Littau
Slotcarrod's Rumpus Room: http://www.rc10talk.com/viewtopic.php?f=77&t=16113
25 Years of the RC10: http://www.rc10talk.com/viewtopic.php?f=35&t=13059
Slotcarrod's Rumpus Room: http://www.rc10talk.com/viewtopic.php?f=77&t=16113
25 Years of the RC10: http://www.rc10talk.com/viewtopic.php?f=35&t=13059
-
- Regular Member
- Posts: 20
- Joined: Wed Jul 04, 2012 1:06 pm
- Location: St. Cloud Florida
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 24 Replies
- 2645 Views
-
Last post by slim_chance
-
- 15 Replies
- 1375 Views
-
Last post by flipwils11
-
- 5 Replies
- 983 Views
-
Last post by airbats801
-
- 2 Replies
- 850 Views
-
Last post by sschering
-
- 20 Replies
- 4624 Views
-
Last post by jwscab
-
- 2 Replies
- 564 Views
-
Last post by Johnboy72
-
- 16 Replies
- 1406 Views
-
Last post by matthew john
-
- 19 Replies
- 2295 Views
-
Last post by Kaiser Q
Who is online
Users browsing this forum: Amazon [Bot],
Facebook [Bot] and 14 guests