Got these in a trade recently, still trying to decide which to restore & which to run.. maybe run both? Hoping we have vintage racing in the area, although I'm not sure the XXX4 falls into "vintage."
Where's a good source for XXX4 info? How's parts availability?
Plus losi ran the XXX-4 at the worlds! If you check out Oople, they still have the coverage up. Many were running with the new TLR 22 Shocks, and the new machined shock towers.
I put a brushless combo out of the TLR22 (13.5T motor and little esc). Handles that fine, however if you use full brakes the motor stops so strong that you can hear the belt skipping teeth.
I also ran a sidewinder 5700 in it on 3S, it was absolutely rediculously fast but I was afraid something was going to give in the drivetrain. Held up for the pack I ran through it though...
huminski wrote: if you use full brakes the motor stops so strong that you can hear the belt skipping teeth.
quote]
Every XXX4 I have ever seen run sounds like that on the brakes
I don't have any experience with the XXX4 and not MUCH with the XX4, but could the "skipping" sound you describe actually be the spur gear setup. It clicks when going in the wrong direction.
TOTAL guess here, please don't flame if I'm way off LOL.
I started building my Whats old is new Rc-10 last year to take my mind of wanting to buy this car. Well I finished the Rc-10, so I needed to buy it to get it off my mind this...
Last post
Hoopty!!
I just bought one of those, a lime green '04 rubicon. I really wanted the camaro, but the convertible is not available. The jeep with the top/doors off is a fun toy. It also doubles as a good winter vehicle, part of the plan to justify a...
i've been wanting a really nice radio for ages, so i got a 4pk.
it feels pretty darn nice in the hand, but i havent powered it up yet to see how the interface works.
it's waaaaay nicer than my 4ch nomadio, which imo feels like a playschool toy...
Last post
so... the one feature i just ASSUMED this damn pig would have... it doesnt.
no momentary 3-way toggle.
so... who wants this thing? i'll trade it for some wheel bearings and a couple spur gears. :wink:
Got these in a trade recently, still trying to decide which to restore & which to run.. maybe run both? :wink: Hoping we have vintage racing in the area.
YZ-10 World Edition? How's parts availability?
IMAG0721-K250.jpg IMAG0723-K250.jpg...
Last post
Not sure what's left around here, I believe there are a few indoor tracks but I need to look more into it.
New toy in the shop. After a couple months of research and trying to learn a bit on my own about them I went and bought a 3D printer earlier in the week. Got the Ender 3 V2 and also bought the Swiss direct drive dual gear aluminum extruder and all...
Last post
No theater room is complete without some Star Wars decor. Tallest 3D print I have done so far, about 14 . Did a weathered looking paint job on him.
WASHINGTON (Reuters) - Another toy is being recalled because of the possibility that sharp edges could injure children playing with the device. PlayCo, importer of the Super Slider, claims that...
Last post
I don't see any meat collector under the slider :?
It is part of the upgrade package that includes a dipping pool at the end filled with Iodine and a life supply of ointment.
Ok, so the bug is biting harder. Pics of my 2nd gold pan follow. :mrgreen:
It fit my bill to have a pavement worthy car separate from a dirt car. I think this is a CE, can you all help confirm? What era did black plastic bits come into play? The...
Last post
check out this thread of tulsa's raborn. he used a factory works rocket body on it. and he said it will clear the front shock tower. then for the rear one, just cut the original one down, and put some shorter shocks on it.
My new toy,this is so cool,but i'm stickin with brushed motors,I have a 8T ESC,which motor should I run on the Truck just around the house n woods. O yeah spur/pinion also. Thanks Johnny
Last post
They are RPM Revolver w/proline slash, makes it a little wider.