Gearing suggestions on Yz-10

Post by **DJGonzo69** » Tue Nov 08, 2011 1:15 pm

Hi All,
Just wanted to know if yu guys have any gearing suggestions on the YZ-10 if using a 17.5, 10.5 & 5.5 Brushless motors. Also what is the gear ratio of the Yoke is is 2.25?
Thx,
John

Post by **slotcarrod** » Tue Nov 08, 2011 4:15 pm

Looking for this info myself!

Post by **DJGonzo69** » Thu Nov 10, 2011 1:11 pm

I just found out the gear ratio of the Yoke...it's 2.2

Post by **slotcarrod** » Thu Nov 10, 2011 4:02 pm

Cool thanks!

Post by **scr8p** » Thu Nov 10, 2011 4:52 pm

2.33 according to an old twister gearing chart......

Post by **Charlie don't surf** » Thu Nov 10, 2011 5:54 pm

Maybe the difference is the 3mm vs 2mm belts and pulleys? There was a 33t and 35t diff pulley option for the 93 and up in 3mm, and a 15/16 center pulley

Post by **DJGonzo69** » Thu Nov 10, 2011 6:21 pm

33 Tooth Pulley / 15 Tooth Center Pulley= 2.2
The variations might be on the different pulleys used.
I will have to recount the pulleys to be sure.

Post by **Justjoe** » Fri Nov 11, 2011 12:28 am

The early YZ10 was 2.33. Mine came with the 35 tooth diff and 15 tooth center pulley. Not too sure what the 91/93 works cars came with.

RC10Talk - The Net's Largest Vintage R/C Community

Gearing suggestions on Yz-10

Gearing suggestions on Yz-10

Re: Gearing suggestions on Yz-10

Re: Gearing suggestions on Yz-10

Re: Gearing suggestions on Yz-10

Re: Gearing suggestions on Yz-10

Re: Gearing suggestions on Yz-10

Re: Gearing suggestions on Yz-10

Re: Gearing suggestions on Yz-10

Create an account or sign in to join the discussion

Create an account

Sign in

Who is online