Vintage AE & I Got 870c Runners!

[vintage AE]

I think that would be cool on the hop up runner.

I think I need to start with the basics first. I got myself a set of Associated Team shocks on the way and I paid for a new body with fresh paint that I cant wait to see. The next thing for me is working on the correct wing wire geometry, which I probably wont get to til I get the body. I got the receiver, and brushless system installed. I'm probably going to grab a servo along with some Losi Step Pins from PM Hobby Craft the next time I'm by. If I don't use the Losi tires on the 870c, I will use them on my RC10 runners.

[jwscab]

fronts are really close, 1mm or so. Rears are IIRC about 7mm per side too narrow.

If JC has made new ones since then, that's awesome, but I was originally the one to tell him that the offset was wrong and he changed the ebay description.

I think I probably mentioned all this in that thread.....

[slotcarrod]

Thanks for the info jwscab! VAE, I will pass on the wheels. I will make my own fronts somehow! I have seen other people narrow and glue custom tires, I think I can do it!!

[vintage AE]

SO STOKED, got this gem for a good fair of about $50 seconds ago from ebay

$(KGrHqYOKocE35g,etHUBOKMJSDBd!~~0_12.JPG (19.16 KiB) Viewed 1053 times

$(KGrHqYOKocE35g,etHUBOKMJSDBd!~~0_12.JPG (19.16 KiB) Viewed 1053 times

http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=320731846640&ssPageName=STRK:MEWAX:IT#ht_500wt_1156

[crusaderlyf]

Hope you will love the stuff,I love TCS slipper, it works great.

[vintage AE]

I'm sure I will love it. I hear it's a must have for the 870c and appearently very rare, so I had to jump on this. Thank you for posting it

[Alex B]

SO STOKED, got this gem for a good fair of about $50 seconds ago from ebay

$(KGrHqYOKocE35g,etHUBOKMJSDBd!~~0_12.JPG

http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=320731846640&ssPageName=STRK:MEWAX:IT#ht_500wt_1156

Apparently you can use the updated stealth trust bearing (solid brass) as opposed to the one pictured in the photo for better performance.

[Asso_man!]

SO STOKED, got this gem for a good fair of about $50 seconds ago from ebay

$(KGrHqYOKocE35g,etHUBOKMJSDBd!~~0_12.JPG

http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=320731846640&ssPageName=STRK:MEWAX:IT#ht_500wt_1156

WOW high $ for that one, I have two of these NIP.

[crusaderlyf]

SO STOKED, got this gem for a good fair of about $50 seconds ago from ebay

$(KGrHqYOKocE35g,etHUBOKMJSDBd!~~0_12.JPG

http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=320731846640&ssPageName=STRK:MEWAX:IT#ht_500wt_1156

WOW high $ for that one, I have two of these NIP.

Is that ZC-670 or ZC-670H?

[Asso_man!]

ZC-670C

Right in the middle of the pic:

[crusaderlyf]

ZC-670C

Right in the middle of the pic:

WOW, nip TCS is very rare, you still have not complete TCS & some YR-4 & 870C center drive.

[Charlie don't surf]

Anthony, you know you just paid more for that one then the one I told you about in Daves BST thread

[vintage AE]

no, I didn't notice. In fact I just assumed that that other one was sold already

[vintage AE]

Anthony, you know you just paid more for that one then the one I told you about in Daves BST thread

WOW, I should really read things more carefully. Dave has one in the BST? I thought you were referring to the one off ebay in the bigjeepzz thread, huh. Maybe Rod should go for the one Dave has for sale.

[slotcarrod]

Where? How much?