Vintage AE & I Got 870c Runners!

[vintage AE]

The 3m VHB tape has held every high speed digital servo perfectly every time.

Thanks guys!

I didn't know the 3M VHB tape was strong enough for the high speed servos. I knew it was tough, but that's good, I will use it.

[Alex B]

http://www.ebay.co.uk/itm/DOUBLE-SIDED-FOAM-TAPE-CAR-BODY-MOULDINGS-NUMBER-PLATES-/270780921784?pt=UK_Body_Shop_Supplies_Paint&hash=item3f0bccf7b8

There you go

[vintage AE]

what are people using for modern tires for their runners?

I hear of people using modern rear tires and cutting them in the center, narrowing them and gluing them back together to fit the fronts, but let's face it, not everyone has the tools to do that. Okay, I don't think I do, lol or have the know how

That track I go to is fairly lose, so keep that in mind. In the mean time I will be looking around.

[Charlie don't surf]

I can make you some, but the easiest thing to do us get some of the.JC racing 2.2 wheels and put some jconcepts goose bumps on them-

[vintage AE]

I can make you some, but the easiest thing to do us get some of the.JC racing 2.2 wheels and put some jconcepts goose bumps on them-

I might take you up on that, but Rod and I are possibly going to narrow some Losi rear Step Pins for the fronts, but if I don't make out to well with that I will drop you a PM.

I haven't seen and JC wheels that fix this buggy, do you have a link for those JC racing 2.2 wheels?

[Charlie don't surf]

There is a link in bigjeepzz thread about his 870-

[vintage AE]

Thanks Reg

I kinda want to stick with my pink wheels...you will see

I might be able to use them as a back up though. It would be nice to find a set of white wheels that I could dye pink that would fit modern rubber.

[vintage AE]

YAY, I noticed he has pink sets

[Charlie don't surf]

You think I would steer you wrong!!

[vintage AE]

You think I would steer you wrong!!

lol, of course not

[slotcarrod]

YAY, I noticed he has pink sets

Is the offset on these wheels not wrong for the 870?
I remember reading this somewhere!

If the offset is good/ok and you do an order LMK please! I want 2 sets!

[vintage AE]

while we are waiting for that answer

here is the ebay link http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=170649118499&category=140973&_trksid=p5197.c0.m619#ht_500wt_1156

and here is the bigjeepzz thread http://www.rc10talk.com/viewtopic.php?f=29&t=18680 page 3 have way down is the link he provides to ebay. I think they are the same wheel.

[slotcarrod]

Jake says the offset is wrong, but how bad is it? I would like the same look/offset as original! If it's a little wider, I don't care, but if it's narrow... No way!

[vintage AE]

Jake says the offset is wrong, but how bad is it? I would like the same look/offset as original! If it's a little wider, I don't care, but if it's narrow... No way!

oh, come on Rod, you have the long front arms on the hop up car to make up for it if they are more narrow

[Charlie don't surf]

I thought JC made a new wheel since then, but if not I have a set of Jake's correct spacer hubs that you can use-