treehugger wrote:if you keep the blade as parallel to the face of the CF you lesson the chances of delaming it
if you don't put a 4.5 motor in your rc10 and launch it off a huge jump going flat out.... over a fence, it'll lessen the chance of having to worry about fixing the chassis in the first place.
treehugger wrote:if you keep the blade as parallel to the face of the CF you lesson the chances of delaming it
if you don't put a 4.5 motor in your rc10 and launch it off a huge jump going flat out.... over a fence, it'll lessen the chance of having to worry about fixing the chassis in the first place.
Personally dude I would put the 8.5 in it. A dude at the local track had a RC8e with a Tekin system in it, that thing would wheelie like nothing, and there was 2 triples back to back he could clear it 1st try all the jumps. I would go with the 8.5.
I've had a RC10 since '87 (bought it used). I'm pretty sure my first was a 'Edinger' car. I am planning on reassembling that collection of parts n the future.
For now, this is some of the parts that...
Last post
Painted the neon rims -- I like it. Runs great-- had to put the wheelie bar back on for running a 3 cell. My buddies 3s Slash clocks itself at 53MPH, and this thing pulls on it, easily. :)
RC10 Graphite with stealth trans 2.25 , 81/21. Car used on street and off road messing around, no track. This is the combo im looking at. Not looking for max speed.
Without doing too much digging, I wanted to get opinions here about what brushless ESC/motor combos work best in the B4.1 and in and possibly an old is new gold pan setup. I really like the idea of sticking with the LRP stuff, but the Tekin or Mamba...
Last post
Thanks again for the info! Probably will be blinky class. I have one of these already in a car as a runner, not sure of it for racing though:
What are the major differences in the LRP esc's available now? TC-spec, stock spec, and competition?
I'm in the market to buy a new sensored/brushless system. I don't live near a race track to ask locals unfortunately!
I drive 2wd buggy and stadium trucks on high bight surfaces for the most part. I only practice and rarely race.
Some...
Last post
I have several sensorless combos, none of them gave me cogging issues; this includes ESCs by EZRun, Bullistorm, Leopard Toro and Turnigy, and motors by EZRun, Leopard Toro, Speedpassion, Tacon.
The only system that gave me cogging issues is when I...
Took the old runner graphite out of the closet and put a 5700kv castle system in 2s. Geared with 81 tooth spur and 21 tooth pinion. CANNOT KEEP the front tires on the ground. Dropped it down to a 18 tooth pinion and same result. Any suggestions??...
Last post
Great looking RC10 Graphite. I still have one too. Built it when I was 12 yrs old. Love that old -10.
What do ya'll think? I was just glossing over the piles of spare parts, I have darn near enough to assemble a whole 'nother vehicle of some kind, so the wheels started turning. Should a build a long wheel base buggy with wide front arms on a blue GT...
Last post
Well, 'bout as done as it's gonna get. Definitely a competitor for a strangest RC10 buggy contest, if such a thing existed. It's pure AE except for the RRP gears, TRX hub adapters and OFNA rear wheels.