RC10 B1.5 - Build #1 and #2

[Charlie don't surf]

Yup, that works nicely

[cyclepsych0]

Those towers are sweet!! That rear one should be made for the masses! I want one. I want one. I want one!

[rctenracer]

What body are you going to use?

[scr8p]

a viper. it's the only associated body that seems like it'll fit the shape of the t2 chassis nicely.

[scr8p]

anybody with a t2 box or manual, could you let me know what electronics were used on the boxart? mainly the esc and receiver. i was planning on going with novak stuff, but i'm thinking that they should probably be lrp by that time.

[scr8p]

nevermind, i just looked at the online manual.

i guess i could go a couple different ways. in one spot, they show to instal an esc, and it's and lrp. then show how to install the receiver, and it's a novak polaris. after that, they show the chassis with the novak receiver and a novak esc.

being as though the last chassis shot of the truck in the manual is fitted with novak stuff, i guess that's what i'll go with.

[scr8p]

alright, typical slow progress from me , but it's starting to take shape. i have quite a few parts on the way for this. not everything to finish it, but it's getting much closer to completion.

[Charlie don't surf]

What shocks are you putting on this car? And what about rims & tires?

[scr8p]

the shocks will be .89 team shocks (b2), and 1.32 rears. the rearsa re on the way, the fronts at the lhs. but people know how fast i make it over there.

the tires/rims will be the ones i got from you. 3 piece white 2.1 fronts, 2.15 white rears, and the worlds kit tires. well, the rears are anyway (8086 flat stubbies). the fronts i believe are actually for the b2. they look like the 8015's, but they're a little wider.

[scr8p]

actually reg, i only got the tires from you. just remembered that.

the front are 2.15 x 1.02 with one angled rib. i think the 8015's are 2.15 x .95 or something like that with normal ribs.

[Charlie don't surf]

I was going to say I didn't remember the rims I had forgot about the tires too, but the rims didn't male any sense to me

[ThomasH]

Great work, I have never seen anything like it

[scr8p]

i haven't had much time for r/c stuff lately. it should be easing up shortly. but anyways, i've been slowly putting parts on this and figured i'd post some pics.

i still need a couple items for the trans so i can build that, and a couple other misc items. but it's pretty close to completion.

[m_vice]

finally some more photos.

This looks very cool.

[Charlie don't surf]

Better than I thought it would be!!!! Very very cool, like they built it all along!