TRX-1 Scott Montgomery Replica

[drbelleville]

What was wrong with the Blue Groove body? Just curious

[rdanbom25]

I've got all the info u could need ...Scott is my dad

[scr8p]

cool. welcome to the forum.

now, all i need is tom owen's kid to join so i can get all the info i need to replicate his dad's eagle.

[Konich]

What was wrong with the Blue Groove body? Just curious

Well it is what it is I guess. They body itself has no window masks, body post holes are wrong, lexan is thin in some spots.

They did send me 3 wings (2 marked "free). Too bad they are crappy molds, they have 6+ location holes and none are correct.

I would have been better carving it out of a 2 liter bottle. I swear it was designed on an etch-a-sketch!

MR LEXAN OR COBRA KEN HELP!!!!!!!!!!!!!!!!!!!!!!

[Konich]

Well I used a TBG body for mock up and to test some colors to see how close I could get.

[mrlexan]

You guys still want a proper mold/repro?

[klavy69]

Yes...been contemplating cobrakens repro with the undertray but haven't heard back from him about a substantial order. Don't know if he was having problems with demand or with his lexan guy...dunno, was just guessing. But I know of 2 others here on the board I was talkin to about it that also were interested if that helps.
Todd

[kenooze]

Yes Jay, we want a nice repro shell for the TRX1 !

[The Fuhrer]

+ One on the repo.

[rctenracer]

X2 on the repro.

[Konich]

I would buy at least 3 if it were the proper mold. Don't waste your time on the TBG, the blue tape on the bottom is to try to get it to conform right as it flairs out. Also there are a lot of dimples in the lexan, poor window lines. All around junk but good enough to test colors, etc. so I don't screw up a good one.

[harry697]

I'm interested in a few repro bodies! Probably more than a few once I finally get to run the car. I was gonna try one of those tbg bodies,but received a tip to stay away from them.

So when will they be shipping,mrlexan?

[drbelleville]

I'd order up two bodies as well.

[SRTracer121]

id take a trx 3 body for my trx3 build up (starting it many moons from now )

[TRX-1-3]

Hi Guys cool, thread, any ideas on how the AE front wheels were adapted?

With another wade through this thread, those front arms in the pics Kenooze posted up are not production TRX-1 arms. I suspect Scott ran AE arms, blocks, and knuckles with the 3-piece wheel front end.

trx1scottmontgomery[1].jpg (46.63 KiB) Viewed 1760 times

trx1scottmontgomery[1].jpg (46.63 KiB) Viewed 1760 times

We can now proceed to bury this thread again.