RC10B2 #9000

[Charlie don't surf]

I haven't built one of these since I was 16-this is a later kit than I had when I was a kid, it had an update bulletin in the box and black servo horns, servo posts, 3 hole rear arms where mine only had 2 and holes drilled in the chassis for a MSC apparently for the sport kit chassis crossover-

1 a1 b2 6036 014.jpg

Maybe I opened the wrong one!

1 a1 b2 6036 010.jpg

1 a1 b2 6036 009.jpg

1 a1 b2 6036 008.jpg

1 a1 b2 6036 006.jpg

Hope you enjoy my winter therapy!

[m_vice]

Hey Reg, love the B2. This car was the last car I raced with. I still have it with a lot of upgrades, I even have a new short carbon chassis and aluminum front and rear aluminum arm braces. It currently has a B3 body and some wide front tires I would like to replace with the original ones. I’ll start a thread when I get them.

I also started a B3 build and the chassis I have is like the one you have on this one with the MSC holes. Do you know if that chassis came on the B3 also?

[Charlie don't surf]

Does your chassis have another set of holes above the inner ball studs Mig?

[m_vice]

Does your chassis have another set of holes above the inner ball studs Mig?

Yep.

[Charlie don't surf]

Then it's a B3 for sure, but in header carded pkgs ( I have one short & 1 std) they can say B2 or B2/B3 chassis but have the sway bar mount holes for the B3

[m_vice]

Cool, this is my B2 with the B3 chassis. I need to update the thread.
http://www.rc10talk.com/viewtopic.php?f=35&t=4227&start=0

[Charlie don't surf]

Cool! I like the black wheels Miguel!

[Brat]

Always wanted to get one but never had the chance...NEAT!

[slotcarrod]

Nice car, you got an assembly line going?

You all need to get a used one and run it, you may have seen mine? http://www.rc10talk.com/viewtopic.php?f=35&t=10942

I love the second one I built, the short wheelbase chassis version towards the end of the thread. This is my favorite RC10 to drive! When they pop up, used ones go for cheap on eBay!

[Charlie don't surf]

Yes, the assembly line is up and running but is due to have layoffs soon as I only have 2 more cars to build this year I quit smoking 2 weeks ago, and building all these really helps with the stress that my body is going through etc.

I have one more new 9000,(not building) and a "ratrod" B2 runner that was my old car from 95' to build.

[slotcarrod]

Good for you for quitting smoking, it's the best thing you can do and I know it's hard but you CAN do it!

If you feel any urges, just go and whore out some more Worlds Cars! Pimp!

[RC10resto]

I quit smoking 2 weeks ago

Good for you Reggie!
Why does smoking and RC seem to go hand in hand? I am tired of getting RC10 cars & parts that stink

[dsmith]

cool....i bought a b2 from omni BITD brand new...that thing was great....i drove that thing so much..sold it like a dummy...tekin g12c3/shiny bones/buggywald... ...thanks for sharing
keeping busy helps to take you mind off smoking forsure...just keep buying them kits and you'll be alright


drinking beer dosen't help though

[Charlie don't surf]

Good for you for quitting smoking, it's the best thing you can do and I know it's hard but you CAN do it!

If you feel any urges, just go and whore out some more Worlds Cars! Pimp!

Thanks for the comments regarding the smoking I'm over it, and the patch is working
perfectly for me, so it's not too bad--I have to deal with stresses a little differently and the "habit" of having a smoke at certain times is a odd one to get over but on a 1-10 scale this has been a 1.5-2.0 at it's worst so I won't be going back And I sucessfully got pretty lit the other night
without any urges, but I am well aware of how synergistic the two are and any other episodes of inebriation will be avoided for the next 6 months or so.

Thanks guys!