09 VONATs RC10T -- Set Up...

[tecnica2001]

Here's my 10T and the Set up I used for the VONATs

RC10T:
Novak Ballistic 17.5 motor -- 84t spur w/ 29t pinion
Reedy 5000mah 35C Lipo
Novak GTB BL ESC
JC Double Dee tires (rear)
Proline Edge (front)
JC Rulux Wheels
AE quick change conversion
Airtronics Servo
Airtronics M8 w/ DSM
RPM arms, body Mound and bumper
RC10T2 Body

Suspension:
30wt oil (front)/ 35wt oil (rear)
Silver Sprins front/ Blue rears.

Pics:

[adam lancia]

What did you run for pistons, camber links, camber, toe etc...?

[tecnica2001]

Camber:
-1.5 Degrees all around

Toe in:
0 toe in.

Shocks Position:
Front: First hole on the arm, middle hole on the shock tower
Rear: Outside hole on the arm, inside hole on the shock tower

Pistons:
#1 Pistons on all 4 shocks, should've gone with two, but ehh, it worked the way it was...

[adam lancia]

Thanks!

[xanadu]

Who made the chassis undertray? I have never seen one like that.

[LowClassCC]

Who made the chassis undertray? I have never seen one like that.

a&l made them back in the day but stopped making them many years ago. but as luck has it a member here is currently making them. ROH73 is his screen name here.

[tecnica2001]

Yup ROH73 is selling them, they fit real good, I did mine in like 15 minutes, but if I had taken my time it would have come out a lot nicer.

I ran 5 qualifiers and a main and it held like a champ, very strong and durable.