T2 or T3 axles in OG rc10T

[ser3100]

Hey all pardon my noobness but im just wondering if rc10t2 or t3 universals or cvd's will fit the original rc10t truck. Im converting my 10 buggy to a staduim truck and bought the T rear end suspension parts but one of the universals are slightly bent plus i want to use 3/16 axles instead of the 1/4 axles that cam with it. Im also planning on using Losi rear hub carriers to fit the axles. Is all of this possible?

[Bugle]

Dunno about the losi hub carriers but the CVD's/universals are the same length in RC10T, T2 and T3.

[slotcarrod]

Hey all pardon my noobness but im just wondering if rc10t2 or t3 universals or cvd's will fit the original rc10t truck. Im converting my 10 buggy to a staduim truck and bought the T rear end suspension parts but one of the universals are slightly bent plus i want to use 3/16 axles instead of the 1/4 axles that cam with it. Im also planning on using Losi rear hub carriers to fit the axles. Is all of this possible?

T2 and GT 3/16 CVD kits will work. The T3 bone is longer! Not sure about the Losi hubs, that's just wrong to put a peasant part on a Godly car!

[ser3100]

I know i know about the Losi thing. I knew i was gonna get flamed for that one..but i just figured i have some laying around and i know the bearings will fit that axle.

[Charlie don't surf]

The Losi hubs that will work (ie correct spacing) are LOSA2038, and the current buggy hubs from the xxx-cr, any other losi hub would require a B4/T4 outer cvd, or Losi outer cvd

[ser3100]

were these the hubs that came with the OG jrx2/pro?

[Charlie don't surf]

Thats the 2038 that came with the Pro--

[MOmo]

You should still be able to find GT rear hub and hub carriers.

My 10t is sporting T2/GT CVDs w/o a problem.



MOmo