Not sure if this site has been posted here before:
Last post
Hmm, I have a partly assembled Eliminator MT in my basement, I'll have to finish it up sometime. It's really just a pan car with big tires and a gear reduction in the rear.
so this one has been sitting and caught my eye so as if i didn't have enough builds :roll: The chassis is a factory lightweight carbon peice also the radio tray is a lighter fiberglass version. The wheels will be the standard rc12e wheels that...
Last post
yeah that's a nice build alright. are they a rare bolink? i have the bolink case also for the 2gs reciever in my schumacher c-car, also a ko 283 lexan case. :)
Rick Jordan of RJ Speed was kind enough to email me back after I had a question about classic bodies. He informed me that he's recently acquired a number of BoLink's original molds and that many of the classic bodies are now for sale at scroll down...
I commented to a good friend that his bolink was a better set-up than my 10lss. The next time we got together to run he gave me this bolink and new trinity 12t double. What a guy. He wasn't even bitter when I smoked him!
I have an old Bolink digger with the stock four bolt pattern rear wheels on foam tires. I would like to install vintage rubber tires on the rear but am unsure what offroad wheels would work with the digger four bolt pattern. Does anyone know which...
I picked this up on craigslist. The front passanger side is warped and the front is cracked right by the grill. I'm going to clean it up and take it for a test drive.
Last post
thats real cool I would like to find one. I love the LRW I build a 1/24 slot car I drag race as the LRW. its cool I used a chopped top body so its a little different but has all the apeal of it. great car
This was listed along with a Craigslist Kyosho Raider as an afterthought RC10 for $30 The supposed RC10 was coverd by an on road shell in a bad pic so out of curiosity I asked to see a body off pic. 3 weeks later I get this. I'm sure he'd take $25...
Last post
Yup, Bolink Eliminator 10. A good entry level car in it's day. Well the price was right, and there were lots of parts made for it.
This is a BoLink Digger I have had for a while - I remember as a kid (1985 or so), some guy was playing around with one of these in the pits at the local off-road track. His Digger had rubber tires, knobbies in the back, and was the fastest thing I...
Well the starting point is this little dirty bug hoping to find a period correct bolink body :wink: rear pod is used but i have a aluminium technique that should make it work.
Last post
Very nice I always liked those wheels, I wish they made them in 1/10 scale they would look great on my 10L Camaro. nice wing mount
here's my sons bolink sport 2000(i think :roll: ) pro stock that he built up. mcallister ford pro stock body and jg foams. thanks red scampi for the bolink chassis and rc10johnny for the pure-tech straps and front end parts. he's pretty stoked to...
Last post
That thing looks tough,are those bodies still available?How old is your son?Hes done an amazing job.
james, i don't think this one is available any longer, but if you are interested i can send gary an email to see if he can still pull them....
I bought this from them in May 2004 when they were going out of business. They were also gracious enough to sign it for me. I thought I was buying the one used for the box picture but it ended up being the model used for trade shows and other...
Last post
1970 Makes total sense. They almost had to have been working on them before that 1971 date.
Picked this up awhile ago with some other stuff, thought it was cool.
Old dragster. The tires are cracked, but otherwise it appears that it was never actually ran.
@13 wheelbase and looks to take a small nitro engine, probably @ .12 size.
Anyone...
Last post
:mrgreen:
Paint didn't turn out quite as I had hoped...
I use transfer tape used for installing vinyl decals and the only stuff I had is the low tack, which doesn't stick well enough for thin lines on lexan....as I found out. :oops:
i have this old item, not runnin, but complete & boxed......
lookin for a collector club / info on these...... :roll:
i am new, this 1st post, USA > n.c.
Last post
yep, OLD SKOOL.....probaly not gonna make run, too much NEW
technology to have fun with.... :mrgreen:
_____________________________
herbie VW 1:64 zip-zap
maisto VW ghia 1:24
new bright 1:6 New Beetle 3 sp.
I owned this years ago..painted it..set it up..but never raced it..I think it's a Bolink but not 100% sure..it must of been expensive it's got some pretty heavy looking security standing around it..also found some pictures of my Kyosho truck with...
Last post
Looks like an Eliminator E10. Hard to really tell with the body on though...
I bought this thinking it was a digger. but after comparing it to the pictures I can find of diggers it is not the same.
The front end is set up like a legends, the horizontal plate is down low ont he chassis with square cutouts for tierods. The...
Last post
The tires are just the standard bolnk tire. Same as the legend only differrent wheels.
Most foam tires look the same, My question is what wheels are these?
They look like the bolink pan car type. Possibly early version of their pan cars? I think...
Here is the Bolink I picked up off of the bay and have decided to restore. I do not know the exact model and if anyone has instructions they could post or PM to me I would greatly appreciate it. Also any advice or information you may have to share...
Last post
My first real R/C car was a bolink. I think I still have parts of it somewhere. Nice build.
If anyone is interested in another Baja Bug to add to the growing collection....,
It looks like the old Bolink Digger has been re-issued by RJ Speed.
This might be a cheap alternative for a street (only) basher or body.
Last post
I bought one of the originals when they firs came out back in the day. The track I raced at had a class for them, it was a five lap dash. I think I paid under $40 for a new kit. When I moved I tossed it in the garbage as I though I would never use...
Was never a big Bolink fan but when I saw this I thought that if I were to own a bolink this would be the one I would want so I grabbed it.
Last post
Hello, I am kind of new to the forum, made some posts and been reading articles. Was wondering, what type of Bolink that is that you have pictured?? The decals show Eliminator, but the chassis resembles a Legend or better yet a Digger style, not the...
A few pics of my Bolink drag chassis with a '70 Mustang body. Astroflight ESC along with a Top Fuel II motor.
If anyone could direct me to a source for the battery trays for this car, I'd appreciate it! Also need a pair of the Astroflight zero loss...
Last post
Do you need the lexan battery mounts with the moulded mount to that gets glued between the cells? I have a pacjage of them around here some where. I would send it to you No Charge if It's the correct one.
Bill C
Heres the very first dirt tracker got it from steve Rule it was in pretty ruff shape. So i did a tare down trying to perserve all the original plotting lines and pencil marks. The tires were tuff i cleaned with lots of stuff but stiil had that haze...
I got this car a few weeks ago for FREE! I know its a Bolink, I believe an eliminator sport. I know there's one or two Bolink buffs on here so feel free to clue me in. I think I'm just going to clean it up, put some decent tires on it, some bearings...
Last post
Normally the post and tube in the back has a spring in it but it looks like someone put a rc10l shock on it. And yes it is a eliminator sport and yes i would be interested i will send a pm.
Is anybody interested in a NEW-OLD body for your TA01, TL01??? Have you ever seen the Bolink vintage Robbi Gorden styled Ford trophy truck? I'm going to buy some newly pulled bodies and want to know if anyone else is interested in going in togather....
Last post
just arrived back at my parents place and found my repro-body waiting for me (hehe: that sounds odd)
I'm very happy with it , nice strong lexan got used for this one and it looks just just as good for real as in the pics (in contradiction to the...
Here is my race abused bolink legend. It has ran inside on carpet and outside on dirt, and probably hasn't been cleaned since the last race LOL.
These are neat little cars. I just saw the other night that the RJ Speed versions are available on...
Last post
these where fun little cars. my local track ran a spec class and a mod class. the track was smooth paved indoor concrete with nitro fuel sprayed on the floor( so i was told). we would use rtv silicone on the tires. there was so much traction you...
Just some pics of another bolink eliminator with a new tecnacraft aero pod the body is a pre painted andy's thanks again to bill at cline's love this body. The wheels are new out of the package tm
Last post
WOW! that body looks great cut out and decaled up! Great car! I have a rear suspension kit for that 91 sport chassis to make it a supersport. Great Ride!
It looks like it *might* have been assembled and run *once*. Or maybe never. Darn near perfect except for the residue on the chassis bottom from where the battery covers were glued on. This...
Users browsing this forum: No registered users and 4 guests
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum