What CVDs would Fit on an RC10 Graphite with RC10T arms?????
-
- Approved Member
- Posts: 1047
- Joined: Mon Jun 30, 2008 3:17 am
- Location: East Haven, Connecticut
- Has thanked: 19 times
- Been thanked: 29 times
What CVDs would Fit on an RC10 Graphite with RC10T arms?????
Let's say hypothetically(spelling please) i was able to land an RC10 Graphite, and wanted to convert it into a Truck, what kind of CVDs can I use when I install rear RC10t arms??
Is it at all possible to do this conversion??
Has anyone on here done it??
THank you?? I guess??
Am I still asking questions??
Dough i am, aren't I?? oh geeshh.
Is it at all possible to do this conversion??
Has anyone on here done it??
THank you?? I guess??
Am I still asking questions??
Dough i am, aren't I?? oh geeshh.
Life is like a box of chocolate, you never know what R/C car you're gonna get next!!!
- shodog
- Approved Member
- Posts: 3816
- Joined: Thu Oct 05, 2006 3:09 pm
- Location: Washington
- Has thanked: 3 times
- Been thanked: 86 times
Re: What CVDs would Fit on an RC10 Graphite with RC10T arms?????
a set of RC10T CVD's should work. the rear chassis drillings on the RC10T is the same as the RC10 and it uses the same arm mounts. The chassis will be shorter so you might have a tough time making a body fit.
-
- Approved Member
- Posts: 1047
- Joined: Mon Jun 30, 2008 3:17 am
- Location: East Haven, Connecticut
- Has thanked: 19 times
- Been thanked: 29 times
Re: What CVDs would Fit on an RC10 Graphite with RC10T arms?????
Oh brother, so the rc10 graphite has a shorter wheel base than the rc10t? so any suggestions as to what body might work??
I might just keep my eyes peeled on ebay, and try and get me an RC10T.
I might just keep my eyes peeled on ebay, and try and get me an RC10T.
Life is like a box of chocolate, you never know what R/C car you're gonna get next!!!
-
- Approved Member
- Posts: 1047
- Joined: Mon Jun 30, 2008 3:17 am
- Location: East Haven, Connecticut
- Has thanked: 19 times
- Been thanked: 29 times
Re: What CVDs would Fit on an RC10 Graphite with RC10T arms?????
How's about a beetle bodied RC10 Graphite Truck, with RC10T blue RPM arms, blue tierods, RPM ball cups, Maybe use one of them Kamtec bodies , oh geez I'm getting ahead of myself.
That'll stick out in the Nationals 2wd truck class, won't it??
That'll stick out in the Nationals 2wd truck class, won't it??
Life is like a box of chocolate, you never know what R/C car you're gonna get next!!!
- scr8p
- Administrator
- Posts: 16527
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 28 times
- Been thanked: 957 times
Re: What CVDs would Fit on an RC10 Graphite with RC10T arms?????
you'll also have to modify the front kickup on the graphite chassis to except the 10t front bulkhead.
-
- Approved Member
- Posts: 3753
- Joined: Tue Feb 07, 2006 2:12 pm
- Has thanked: 15 times
- Been thanked: 35 times
Re: What CVDs would Fit on an RC10 Graphite with RC10T arms?????
or dare i say it... cut off the graphite kickup and use a truck nosepiece?...scr8p wrote:you'll also have to modify the front kickup on the graphite chassis to except the 10t front bulkhead.
Re: What CVDs would Fit on an RC10 Graphite with RC10T arms?????
yea for a queenbadhoopty wrote:or dare i say it... cut off the graphite kickup and use a truck nosepiece?...scr8p wrote:you'll also have to modify the front kickup on the graphite chassis to except the 10t front bulkhead.
-
- Approved Member
- Posts: 1047
- Joined: Mon Jun 30, 2008 3:17 am
- Location: East Haven, Connecticut
- Has thanked: 19 times
- Been thanked: 29 times
Re: What CVDs would Fit on an RC10 Graphite with RC10T arms?????
Can't I just slap on som front RC10T arms on the Graphite Bulkhead??
Life is like a box of chocolate, you never know what R/C car you're gonna get next!!!
- scr8p
- Administrator
- Posts: 16527
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 28 times
- Been thanked: 957 times
Re: What CVDs would Fit on an RC10 Graphite with RC10T arms?????
you sure can. if you want your front track width an inch wider than the rear.tecnica2001 wrote:Can't I just slap on som front RC10T arms on the Graphite Bulkhead??
-
- Approved Member
- Posts: 1047
- Joined: Mon Jun 30, 2008 3:17 am
- Location: East Haven, Connecticut
- Has thanked: 19 times
- Been thanked: 29 times
Re: What CVDs would Fit on an RC10 Graphite with RC10T arms?????
No no I mean, I would be using Rear RC10T arms as well, would it still be 1" wider in the front if I had rear Truck arms??
Life is like a box of chocolate, you never know what R/C car you're gonna get next!!!
- scr8p
- Administrator
- Posts: 16527
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 28 times
- Been thanked: 957 times
Re: What CVDs would Fit on an RC10 Graphite with RC10T arms?????
the buggy kickup is wider than the truck kickup.
-
- Approved Member
- Posts: 1047
- Joined: Mon Jun 30, 2008 3:17 am
- Location: East Haven, Connecticut
- Has thanked: 19 times
- Been thanked: 29 times
Re: What CVDs would Fit on an RC10 Graphite with RC10T arms?????
Ok so I'm scrapping this Idea, cause there's no way I'm gonna cut off a graphite chassis, for one, and I'm not going to be running a retarted looking truck with way too wide front suspension
I guess is back to the drawing boards. If I do get the graphite, I'm restoring it and selling it
I guess is back to the drawing boards. If I do get the graphite, I'm restoring it and selling it
Life is like a box of chocolate, you never know what R/C car you're gonna get next!!!
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 10 Replies
- 902 Views
-
Last post by Coelacanth
-
- 3 Replies
- 597 Views
-
Last post by juicedcoupe
-
- 8 Replies
- 1314 Views
-
Last post by limestang
-
- 16 Replies
- 788 Views
-
Last post by Mtherr1988
-
- 21 Replies
- 2454 Views
-
Last post by RichieRich
-
- 2 Replies
- 102 Views
-
Last post by Bottom Feeder
-
- 32 Replies
- 6891 Views
-
Last post by jwscab
-
- 7 Replies
- 1112 Views
-
Last post by justinspeed79
Who is online
Users browsing this forum: No registered users and 15 guests