Hi!
I'am building an brand new RC10 World's from old and new parts. Last part missing is the ASC7377 - Rear Axle Bearing Spacer. I can't find it anywhere. I know I could buy a B4, or T4, that used this part, but I hope RC10 Talk community could help me with a solution for this very simple part, as a 3d print. Thk you all!
Rouki wrote: ↑Mon Apr 08, 2024 6:14 pm
Hi!
I'am building an brand new RC10 World's from old and new parts. Last part missing is the ASC7377 - Rear Axle Bearing Spacer. I can't find it anywhere. I know I could buy a B4, or T4, that used this part, but I hope RC10 Talk community could help me with a solution for this very simple part, as a 3d print. Thk you all!
any bit of tubing that preserves the space can work. You may be able to try 5mm tubing and cut to length
anybody have a pic and measurements for the spacer between the rear hub bearing and the drive pin? mine are missing and i might make a few on my lathe, thanks.
Last post
$2 for 2
I made some out of aluminum tubing from the lhs. Not as pretty as the factory ones, but for the same $2 I got enough tubing to make a ton of these
I know i have read on here about people doing this but i have tried and have tried just about every dogbone i can find and cant seem to find one long enough i have a rc10 graphite im turning into a racer and i want to make the rear as wide as...
Last post
thunder tiger bx buggy rims are the same as b3 rims.
Hi, I see a lot of nice rc10 in this forum. I'm new to the vintage hobby and would like to know if changing the rear axle to B4 is the only changes I need for using the wheel that we normally see at hobby shop now? Do I need to change the carrier...
Last post
Welcome,
You will be doing a lit of reading, then decide if you will be changing the axle to 3/16 to fit modern B4 rims or just need an adapter or rims from ebay.
Can someone with an Ultima and a gold pan RC10 tell me if the rear axle threads are the same size? I just need to know if an Ultima rear wheel nut will fit on an RC10.
Thank You
Last post
What extension nuts are you looking for? Kyosho or Associated?
Hello all,
My cone washers are getting a little squished, and they are backordered most places. Before I order from rc10.com or Robobugs, does anyone know of a substitute that fits the stock axles? Thanks.
With my last small parts order I got some 91633 FT 12mm piston (V2) blank TP cheap on Ebay. Like $6 for 4 12mm pistons.
The price of 9608 spacers, when you find them, is $20 to $25 per pair if not more.
The thought was @ $3.00 per pair I might drill...
The rear stub axle broke on my 35 year old rc10. Googling doesn't seem to turn up anyway of getting hold of a replacement. Any pointers on where I could find one please?
Edit: I know the likely answer is ebay, but it looks like they come up every...
Amazon [Bot], 
