what degree rear mounts to use with b4 hubs?

Post by **chophead69** » Thu Apr 25, 2013 1:25 am

Ok i am using b4.1 hubs with b44 cva's ont the rear i want to change my arm mounts to black ones and i found a set of andy's 3degree.but i cant find out any info on the b4 hubs as far as what degrees they are.i cant even see where the rear toe comes from on a b4.so i know the toe on a rc10 comes from the mounts and i believe its 3degrees right?so i should get the 3degree andys black mounts right? Does the stock b4 hubs have toe? Thanks for any help

Post by **chophead69** » Thu Apr 25, 2013 12:48 pm

Will the 3degree work?

Post by **foots** » Thu Apr 25, 2013 10:36 pm

Rear toe on a B4 is in the inner mounts. O on the outer hub.. On a RC0 with stock mounts the way to go is buy "wollered" out B4.1 Worlds aluminun hub carriers " slop on the hinge pin hole" makes them almost free" so 1.5 innner and .5 on the outer is a good start on most current high bite tracks.

RC10Talk - The Net's Largest Vintage R/C Community