AYK Bobcat or Buffalo

Post by **Coelacanth** » Tue Jan 25, 2011 10:30 am

Wow, nice clean-up, ireg. My buddy (who has a Buffalo) would love seeing this resto.

Post by **murphy3428** » Tue Jan 25, 2011 11:18 am

The kyosho scorpion/tomahawk wheels should fit the ayk bobcat for the body if this is going to be a runner you may want to try a kyosho tomahawk body as a substitute body you will need to do some trimming around the rear shocks but it does look like it would work.Hope this helps you out good luck

Post by **Mr. ED** » Tue Jan 25, 2011 12:22 pm

murphy3428 wrote:... for the body if this is going to be a runner you may want to try a kyosho tomahawk body as a substitute body you will need to do some trimming around the rear shocks but it does look like it would work.Hope this helps you out good luck

Mr. lexan's VW bug is a safe alternative

Post by **AYKBOBCAT** » Wed Jan 26, 2011 8:09 am

Nice job Ireg...

What wheels are those?

Post by **SFC K** » Wed Jan 26, 2011 5:11 pm

AYKBOBCAT wrote:Nice job Ireg...

What wheels are those?

Ditto! Looks like it cleaned up really nice! I love the wheels too! Who doesn't like yellow!

Post by **Mr. ED** » Thu Jan 27, 2011 3:03 pm

Tamiya wheels for a fighter something

Post by **Coelacanth** » Thu Jan 27, 2011 3:20 pm

SFC K wrote:Who doesn't like yellow!

Me. Except for brown, yellow has to be my least favorite color.

Post by **ireg** » Sat Jan 29, 2011 6:04 am

Hcp22 wrote:
ireg wrote:as mentioned, i started dis-assembling the kit for cleaning and make it run
so far i encountered only one problem that is 'removing the wheel hub '
Did you manage to get those wheel hubs apart?

I havent tried removing the wheel hub as i dont want to be disappointed if i cant remove again

.
My intention as of the moment is to rebuild the car the way it is and workout from there

.

slow_jun wrote:ireg,

nice rig.... wow. not so very common that you see around here...... (that is for me)....

cheers!!!

i wish i have more time to spare to finish this project, so we can race together with your RC10

.

Coelacanth wrote:Wow, nice clean-up, ireg. My buddy (who has a Buffalo) would love seeing this resto.

Thanks i hope he do it to

.

murphy3428 wrote:The kyosho scorpion/tomahawk wheels should fit the ayk bobcat for the body if this is going to be a runner you may want to try a kyosho tomahawk body as a substitute body you will need to do some trimming around the rear shocks but it does look like it would work.Hope this helps you out good luck

Wow! another rare parts and body shell, but knowing there is an alternative it gives me more hope to look forward too

Mr. ED wrote:
murphy3428 wrote:... for the body if this is going to be a runner you may want to try a kyosho tomahawk body as a substitute body you will need to do some trimming around the rear shocks but it does look like it would work.Hope this helps you out good luck
Mr. lexan's VW bug is a safe alternative

i will try to search for it. thanks as always

Post by **ireg** » Sat Jan 29, 2011 6:09 am

AYKBOBCAT wrote:Nice job Ireg...
What wheels are those?

SFC K wrote:
AYKBOBCAT wrote:Nice job Ireg...
What wheels are those?
Ditto! Looks like it cleaned up really nice! I love the wheels too! Who doesn't like yellow!

Mr. ED wrote:Tamiya wheels for a fighter something

Ed is right its Tamiya wheels for my holiday buggy

Coelacanth wrote:
SFC K wrote:Who doesn't like yellow!
Me. Except for brown, yellow has to be my least favorite color.

Post by **Mr. ED** » Sat Jan 29, 2011 8:14 am

ireg wrote:
Mr. ED wrote:Mr. lexan's VW bug is a safe alternative
i will try to search for it. thanks as always

Available here: http://www.rc10talk.com/viewtopic.php?f=61&t=12407
But maybe you want to measure up the wheelbase first (distance between the center of the fron wheel to the center of the back wheel)
That way we can confirm the fit for you

Post by **Mr. ED** » Sat Jan 29, 2011 8:23 am

ireg wrote:
Hcp22 wrote:
ireg wrote:as mentioned, i started dis-assembling the kit for cleaning and make it run
so far i encountered only one problem that is 'removing the wheel hub '
Did you manage to get those wheel hubs apart?
I havent tried removing the wheel hub as i dont want to be disappointed if i cant remove again .
My intention as of the moment is to rebuild the car the way it is and workout from there .

If you plan to use the yellow wheels: which is perfectly possible with quite easy to find parts, you will need to throw out that rear axle and hub anyway. So don't worry about damaging those and just give it a nice tap on the threaded end to loosen the conical fit between the hub and axle

Post by **Mr. ED** » Sun Jan 08, 2012 6:41 am

How's the project standing today?

Post by **RedScampi** » Sun Jan 08, 2012 7:50 am

Also note that TBG now makes a Bobcat, and (I think) a Buffalo body.

Post by **ireg** » Sat Feb 04, 2012 2:20 am

Mr. ED wrote:How's the project standing today?

Hi Mr. ED thanks for knocking

the kit were done using original wheels at the back and kyosho wheels and tire in the front.
cant decide what body shell paint scheme for the moment.

RedScampi wrote:Also note that TBG now makes a Bobcat, and (I think) a Buffalo body.

here is the the bodyshell wheels with tires and decals, i just realy hate the painting touches

Post by **Scatamonky** » Wed Dec 11, 2013 4:43 am

Anymore progress on this thread? I realise that it is nearly 2 years ago but hey, worth a try!

RC10Talk - The Net's Largest Vintage R/C Community

AYK Bobcat or Buffalo

Re: AYK Bobcat or Buffalo

Re: AYK Bobcat or Buffalo

Re: AYK Bobcat or Buffalo

Re: AYK Bobcat or Buffalo

Re: AYK Bobcat or Buffalo

Re: AYK Bobcat or Buffalo

Re: AYK Bobcat or Buffalo

Re: AYK Bobcat or Buffalo

Re: AYK Bobcat or Buffalo

Re: AYK Bobcat or Buffalo

Re: AYK Bobcat or Buffalo

Re: AYK Bobcat or Buffalo

Re: AYK Bobcat or Buffalo

Re: AYK Bobcat or Buffalo

Re: AYK Bobcat or Buffalo

Create an account or sign in to join the discussion

Create an account

Sign in

Who is online