The Official "What is it?" Thread

[BattleTrak]

Is this a Junior T?
.
Screenshot_20231010-180927.png
.
Screenshot_20231010-181116.png

Yeah that’s a Junior T. Wide molded chassis, molded shock towers and threaded rod instead of turnbuckles are giveaways. Missing the motor plate though..

[Diamond Dave]

Is this a Junior T?
.
Screenshot_20231010-180927.png
.
Screenshot_20231010-181116.png

Yeah that’s a Junior T. Wide molded chassis, molded shock towers and threaded rod instead of turnbuckles are giveaways. Missing the motor plate though..

Dead on, Great truck. got a few of em. Threaded rod and chassis as stated tells you what model at the time.

[Elkcycles]

I have this coming in the mail. Looks Tamiya and 1/9 scale, but not entirely sure. Any guesses?

[RogueIV]

Is this a Junior T?
.
Screenshot_20231010-180927.png
.
Screenshot_20231010-181116.png

Like others have said it's a jrt. Really interested in how that motor is mounted though, the motorplate appears to be mostly missing and there's more than likely a lot of hackery afoot.

[TRX-1-3]

Seems like the right place to ask.....

What body do we have here?

[JK Racing]

Looks like the RC10 Mirage/Turbo Mirage (not sure of the difference between them). I think this is the same on my old TCP.

[scr8p]

Seems like the right place to ask.....

What body do we have here?

RCPS Mirage SS. Repopped by a few guys. Sabula Tech would be most accurate because it doesn't have the raised section above the gear cover. Boki and TBG repop the Proline reissue of the Mirage SS that has it.

[TRX-1-3]

Sweet, thanks man.

[Phin]

It's an RC500 front bulkhead with separate upper arm mount blocks that attach via a dovetail slide, so that camber can be adjusted....but who made it? It's molded, not machined so it's probably not a custom one off.

[Mwildmann]

Looking at a 1/10 Kyosho nitro powered 2wd buggy with a molded plastic chassis. You guys have any idea on what model it is? Thanks!

[GoMachV]

Kyosho Sandmaster/nitro tracker series

[Mwildmann]

Kyosho Sandmaster/nitro tracker series

Thank you!

[1911Colt]

What would these Schumacher bearing housings fit? They are noticeably thicker than U7188. They were on a shelfer Bosscat I bought, and were obviously wrong. Because of the extra depth of the housing, the layshaft had a lot of side to side movement.

I have TopCATs, Cougars, an XLS, a ProCAT, and a Bosscat. They all use the same size housings- U7188.

[Retro rc]

What would these Schumacher bearing housings fit? They are noticeably thicker than U7188. They were on a shelfer Bosscat I bought, and were obviously wrong. Because of the extra depth of the housing, the layshaft had a lot of side to side movement.

I have TopCATs, Cougars, an XLS, a ProCAT, and a Bosscat. They all use the same size housings- U7188.

They are for the xl xls topcat cougar bosscat etc, you just need to shim the layshaft for play. I use 1/8 buggy diff shims as the Schumacher bearings are the same size also check that the layshaft has the correct original washer and bearing adaptor in place.

The layshaft bearing housings actually changed slightly on the cougar 2 and bosscat they were slightly thicker and had the Schumacher logo of the 3 arrows on the closed side

[Frankentruck]

Looking at today's forum birthdays I saw this and I'm not sure what it is (other than the Peak Performance motor).

Maybe an RC10 with a red pan, Lethal Weapon gearbox, B2/B3 rear arms, 10T shock tower and funky rear bulkhead? Or is there some T2 stuff there?
.