Duratrax dtx-4 esc manual

Brushed, nicad, radios, etc...

Moderators: scr8p, klavy69

Post Reply
BuddyS
Regular Member
Posts: 7
Joined: Tue Feb 21, 2012 3:48 pm
Been thanked: 1 time

Duratrax dtx-4 esc manual

Post by BuddyS »

Hello all,
Does any one have the manual for the Duratrax dtx-4 esc?
I know it very very similar to the Novak T4 but the adjustment pots seems to be opposite from what is mentioned in the Novak T1 & T4 manual.
Please post a pic of the dtx-4 manual if any one has one.
Thanks

User avatar
juicedcoupe
Super Member
Posts: 2989
Joined: Sun Aug 16, 2020 4:05 pm
Location: Pascagoula, MS
Has thanked: 231 times
Been thanked: 1747 times

Re: Duratrax dtx-4 esc manual

Post by juicedcoupe »

I believe that it is a 410-M5, in a blue case.
Always looking for new and interesting ways to waste money.

BuddyS
Regular Member
Posts: 7
Joined: Tue Feb 21, 2012 3:48 pm
Been thanked: 1 time

Re: Duratrax dtx-4 esc manual

Post by BuddyS »

I don’t believe it is the 410-M5 as the led and pots are in different locations. It looks identical to the T4 but in a blue case.

User avatar
juicedcoupe
Super Member
Posts: 2989
Joined: Sun Aug 16, 2020 4:05 pm
Location: Pascagoula, MS
Has thanked: 231 times
Been thanked: 1747 times

Re: Duratrax dtx-4 esc manual

Post by juicedcoupe »

Yeah, I looked up a picture of it. It's pretty much identical to my T-4 and T-1.

But anyway. Pretty much all dual pot esc's setup the same way. I have multiple Novak, Tekin, Futaba, and Hitec esc's that setup the same way. You are just setting the neutral and high points.
Always looking for new and interesting ways to waste money.

BuddyS
Regular Member
Posts: 7
Joined: Tue Feb 21, 2012 3:48 pm
Been thanked: 1 time

Re: Duratrax dtx-4 esc manual

Post by BuddyS »

I got it all set up and working. I was just hoping somebody here has the original manual for it.
Thanks

User avatar
klavy69
Moderator
Posts: 5150
Joined: Thu May 29, 2008 4:11 pm
Location: Fulton, IL (Land of one stop light but we DO have a windmill!)
Has thanked: 561 times
Been thanked: 265 times

Re: Duratrax dtx-4 esc manual

Post by klavy69 »

BuddyS wrote: Fri Mar 31, 2023 9:57 am I got it all set up and working. I was just hoping somebody here has the original manual for it.
Thanks
Have you checked to see if there is one posted in the archives?
Peace and professionlism.....Kabunga signing off!!!

BuddyS
Regular Member
Posts: 7
Joined: Tue Feb 21, 2012 3:48 pm
Been thanked: 1 time

Re: Duratrax dtx-4 esc manual

Post by BuddyS »

Yes, I searched farther than that as well. Thanks

User avatar
klavy69
Moderator
Posts: 5150
Joined: Thu May 29, 2008 4:11 pm
Location: Fulton, IL (Land of one stop light but we DO have a windmill!)
Has thanked: 561 times
Been thanked: 265 times

Re: Duratrax dtx-4 esc manual

Post by klavy69 »

So, your looking for a manual just to have it? OK, if you can't find it online maybe try facebook. Theres several groups that might be able to help you out. Even if you stayed around long enough to gain b/s/t access and put in a request per the rules in the wanted section instead of out on the board you will pry get the same response as what this got. Please try to keep requests in the b/s/t area though.
Thanx
Todd
Peace and professionlism.....Kabunga signing off!!!

User avatar
Incredible_Serious
Approved Member
Posts: 3426
Joined: Tue Jan 29, 2008 12:09 am
Location: Melbourne, Victoria, Australia
Has thanked: 1406 times
Been thanked: 861 times

Re: Duratrax dtx-4 esc manual

Post by Incredible_Serious »

I knew I had this somewhere..... found on the weekend, so scanned. Quality is not great, as it's a scan of a photocopy from a folder..... but it is legible (I hope!).
DTX4_01.JPG
DTX4_02.JPG
Hope that helps!

Alex
Osiris is the key.

"The world looks so much better through beer goggles... except Farmer in his underwear" - Ken

Look out for Todd K. - he's a convicted serial killer!!!

Post Reply

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

  • Similar Topics
    Replies
    Views
    Last post

Return to “Vintage Electronics”

Who is online

Users browsing this forum: No registered users and 2 guests